Clark TK80

[Jarlath]

Hi All

I have a TK80 SBus got it in the tank my servos (turret, barrel and recoil) will not move soud plays but no movement. Also when the motors try to kick in recoil or drive the board is shutting down completely as far as I can tel everything is wired correctly but there seems to be a lack of circuit diagrams for the board to confirm connection polarities?

Darren

This was something I made up for the TK80. Hope it helps.

[Panzer22]

Hello!

I am new to this forum. I have just purchased 2 TK80LW boards for a Toro KT (non RTR) and a HL Tiger I (RTR). I am quite clueless in the electronic stuff. With the information provided I saw on Clark-model website, I could only get the sound to work. I am trying to set it up for my Spektrum DX9 transmitter. Can anyone with the TK80 in his tank give me a picture of how the connection look? Thank you!

[maxmekker]

Hello!

I am new to this forum. I have just purchased 2 TK80LW boards for a Toro KT (non RTR) and a HL Tiger I (RTR). I am quite clueless in the electronic stuff. With the information provided I saw on Clark-model website, I could only get the sound to work. I am trying to set it up for my Spektrum DX9 transmitter. Can anyone with the TK80 in his tank give me a picture of how the connection look? Thank you!

What version of the board did you buy ? ( sbus ore 8ch version )

[Panzer22]

I bought the 8 channel version.

[maxmekker]

I bought the 8 channel version.

you need to asssign you switches/dials to the channels , so you as example, can engage gear function , use main gun/mg etc


same like in this video, but for 'youre' radio ( so you need to know how to setup youre radio )

phpBB [video]

[Panzer22]

Thank you! I will watch it tonight after work.

[Jofaur86]

Max mekker, is the Clark specialist, you will find here, as well as on youtube, videos explaining the procedure to follow, you should know of course that what configuration you will give to your transmitter, attached links, for info
https://www.battletanksnederland.nl/php ... =15&t=6537
it's quite old, only take into account the information on the type of functions of the TX sticks, depending of course on your driving wishes!! well also check which channel corresponds to which stick? for this connect servos on the RX

[tankme]

Anyone have or know of an STL to print a tray/box to hold the Clark TK-80?