Help with tk60p board

Discussion for Clark electronics.
User avatar
Son of a gun-ner
Lieutenant-Colonel
Posts: 6865
Joined: Sun May 07, 2017 8:49 pm
Location: Surrey UK

Re: Help with tk60p board

Post by Son of a gun-ner »

Biasphere1 wrote:Can somebody read and clarify this , I think Black Knight is correct but I may be mistaken !
I believe the information he gave was correct, and his argument for why it wouldn't work were it NOT an Sbus was sound.
However, before he chimed in, it was already ascertained that the board in question was NOT an Sbus. Therefore, it would NOT connect in Sbus mode, and the OP needed information on how to connect his controller to a NON Sbus board. He did not need to know why it would not connect in Sbus mode, nor have that emphasized and repeated over and over again, which derailed the thread. It was as if he was reading the advice given by silversurfer1947 in reverse, as in, the surfer was telling the OP how to connect to Sbus, when he was not.
Mick - The grit in the underpants of life!
And always happy to spare the bytes

TOTM needs YOU :thumbup: support YOUR TOTM competition, I'm doing my part, are YOU?
Biasphere1
Lance Corporal
Posts: 133
Joined: Sat Oct 03, 2020 4:34 am

Re: Help with tk60p board

Post by Biasphere1 »

It has to be some version of PWM I believe , but yes that may not be right.
I just checked the manual PWM enables IBUS and then he must manually use the 4 outlets(or more) .
It was the Ibus thing that I had trouble with in the radio menu using PWM .
I got it now.
Cheers and THX mate.
Post Reply

Return to “Clark”