TK24G2-L2

[Shootermcgraw]

Does anyone out there in tank land know about these boards from Clark? And do they need to be programmed for GBS capability by Clark?

Sent from my NS-P10A8100 using Tapatalk

[maxmekker]

you have one, ore looking to get one ?

[43rdRecceReg]

There should be lots of accessible info here in the archives, Shooter, if you use the 'search' box. Or, look here in the electronics section of the general index under 'Clark':
viewforum.php?f=77
A direct link to previous discussions and threads on the Clark topic:
viewforum.php?f=204

[maxmekker]

http://clark-model.com/eng/prod_rx60g2/index.html

here you will info of the G2 and programing

[Shootermcgraw]

you have one, ore looking to get one ?

Hi maxmekker,
Yes I have one but looking for someoneone else who has the same?

Sent from my NS-P10A8100 using Tapatalk

[Shootermcgraw]

There should be lots of accessible info here in the archives, Shooter, if you use the 'search' box. Or, look here in the electronics section of the general index under 'Clark':
viewforum.php?f=77
A direct link to previous discussions and threads on the Clark topic:
viewforum.php?f=204

Yes, I should have scrolled down farther before posting I found a similar post. Oops

Sent from my NS-P10A8100 using Tapatalk

[Shootermcgraw]

http://clark-model.com/eng/prod_rx60g2/index.html

here you will info of the G2 and programing

Yeah max,
I have looked at Clark website for installation for my model is this something you have?

Sent from my NS-P10A8100 using Tapatalk

[maxmekker]

I have 2x 60 g2 kit. but not installed it yet. I must get a few models done first before starting my LEO

what are you wanting to program / get working ?

[Shootermcgraw]

I have 2x 60 g2 kit. but not installed it yet. I must get a few models done first before starting my LEO

what are you wanting to program / get working ?

Hi again max,
Let me tell you that I'm new to RC electronic boards and remote controls, just a novice at best so not knowing much about it and learning as I talk to people and buy, I dived in head first with upgrade board suggested by Tankzone with the capabilitys that I wanted for future hop-up add on's when I got enough money.
So the board I bought that was suggested by Tankzone (TK24G2-L2) does not have smoke capability after multiple emails back and forth with Tankzone and Clark come to find out by Clark the board he tells me does not have smoke capability but will support all other capabilities like GBS, IR, track recoil and (airsoft because I have a Heng long upper hull).... I thought I had the board that had the capability to control all functions of tank.
So now I have lost all trust in Tankzone, and stuck with a board that will not have smoke capability.

My question is did your TK60 board have the smoke capability and all other hop-up capabilities and did it need to be programmed from Clark to do so or did you program it to function the way you wanted it to preform?
Reason I ask is because Tankzone tells me I need to send my board back to Clark to be programmed for all hop-up capabilities??
I've had enough of misinformation by Tankzone since these are a new special order board from Clark.....



Sent from my NS-P10A8100 using Tapatalk

[maxmekker]

Lets see now . did you receive ,ore was told that in order to program the Board, you will need the 'Remote ?

Remote + ir wire for programing the Boards many settings

53609521_2337318192998885_7240583522614771712_n (Small).jpg (75.97 KiB) Viewed 2965 times

54518849_338272473702032_6539153769051979776_n (Small).jpg (73.17 KiB) Viewed 2964 times

Port cn10/11 is for smoker . I have not been told that this port is 'deleted' on the TK24g2. I will check if this is true ore false on 'G2' vers

is this a Sbus Board ?