Clark Tk-24 Sbus setup
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Clark Tk-24 Sbus setup
With an incredible amount of help from my friend Stian ( Maxmekker on The forum for those who would like a Clark product) I have finally setup the test for the M-3 Lee Radial engine for my Beutepanzer.
I am beyond impressed with the realism of the controls. As usual he shipped quickly and everything works exceptionally. Very easy to setup and I did it very little work. I know the video may look a bit back and forth but I wanted to capture the operation of the switches with the functions.
Flip a switch and the engine comes alive
Shift into and out of gear with a flick is cool
Cannon and dual machine guns on the exterior dials.
Stian I truly thank you
Cheers
https://youtu.be/8P81SV3AbMk
I am beyond impressed with the realism of the controls. As usual he shipped quickly and everything works exceptionally. Very easy to setup and I did it very little work. I know the video may look a bit back and forth but I wanted to capture the operation of the switches with the functions.
Flip a switch and the engine comes alive
Shift into and out of gear with a flick is cool
Cannon and dual machine guns on the exterior dials.
Stian I truly thank you
Cheers
https://youtu.be/8P81SV3AbMk
Tanks alot....
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: Clark Tk-24 Sbus setup
I don't have your Ninja like skills yet Stian but it is incredibly easy to operate and with the same footprint as the rx-18 very compact.maxmekker wrote:Exelent. Glad to se it up and running
Tanks alot....
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Re: Clark Tk-24 Sbus setup
Fantastic
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: Clark Tk-24 Sbus setup
Thanks John. Now to see it alive in my Vandra Lee...Ludwig von wigbearer wrote:Fantastic
Tanks alot....
Re: Clark Tk-24 Sbus setup
Carl, how is the Sbus version different ? Can you enlighten us ?
Re: Clark Tk-24 Sbus setup
MichaelC wrote:Carl, how is the Sbus version different ? Can you enlighten us ?
for a starter you have more easy operation on the tk24 sbus vs the tk24 4ch version , same as a tk60 8ch and sbus will operate , as you will have 10chanels on the Sbus vs 4ch on the normal tk24.
1 receiver wire between tk board and receiver
Drammen Rock City
Re: Clark Tk-24 Sbus setup
So one wire between the board and the receiver, as well as additional functions like engine start, canon firing, 2nd MG, Clutch etc moved off to their own channels to top up the 8/10 channels ? Does the stick functions stays if you use the Sbus or does it get disabled ?
Thanks for the video !
MichaelC.
Thanks for the video !
MichaelC.
Re: Clark Tk-24 Sbus setup
Not sure I understood last questionMichaelC wrote:So one wire between the board and the receiver, as well as additional functions like engine start, canon firing, 2nd MG, Clutch etc moved off to their own channels to top up the 8/10 channels ? Does the stick functions stays if you use the Sbus or does it get disabled ?
Thanks for the video !
MichaelC.
Drammen Rock City
Re: Clark Tk-24 Sbus setup
I was just wondering if you are using Sbus, can you still use the stick combination to turn on engine etc or if that gets disabled because it has been assigned to a separate channel instead of a combination of channels when it is only 4 channels.