Clark tk60 8 channel setup

Discussion for Clark electronics.
Post Reply
User avatar
c.rainford73
Major
Posts: 6104
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Clark tk60 8 channel setup

Post by c.rainford73 »

Been tinkering with the Nashorn and discovered I had it wired up incorrectly for some time. I guess I should have read the instructions Stian included Image

Now all functions splendidly and I have all wired to the rx channels 1-4 (then rx channles 5-6 are not connected) and then Clark tk60 channels 5,6,7,8 go to rx channels 7,8,9,10 respectively. Using the flysky I6s radioImage

Here she is after I finished the wiring. Stian has quite a wonderful product here

https://youtu.be/VqMG7WKUC8Q
Tanks alot.... :wave:
User avatar
Soeren
Warrant Officer 2nd Class
Posts: 1356
Joined: Sat Oct 22, 2016 3:27 pm

Re: Clark tk60 8 channel setup

Post by Soeren »

Looks and sounds great. The rx is the receiver?
User avatar
silversurfer1947
Lieutenant
Posts: 3338
Joined: Tue Oct 27, 2015 9:54 pm
Location: Bristol, UK

Re: Clark tk60 8 channel setup

Post by silversurfer1947 »

I have the TK24 s-bus board for mine. I am using a FlySky i6x transmitter. Obviously the connections will be very different but hopefully the sounds will be the same. The board came from the same source.
Richard
Tamiya Tiger 1, Taigen FlakPanzer IV,Torro M16 half-track, Tamiya Panther,WSN/Torro T34,Taigen M41 Bulldog,H/l/Taigen Sherman M4A3,H/L T90, Haya M3 Grant, Metal Origins 234/2 Puma, Nashorn by Alwyn. I was only going to have one tank - honest! :D
User avatar
c.rainford73
Major
Posts: 6104
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Re: Clark tk60 8 channel setup

Post by c.rainford73 »

Soeren wrote:Looks and sounds great. The rx is the receiver?
Yes, and mated to the flysky I6s radioImage
Tanks alot.... :wave:
User avatar
Soeren
Warrant Officer 2nd Class
Posts: 1356
Joined: Sat Oct 22, 2016 3:27 pm

Re: Clark tk60 8 channel setup

Post by Soeren »

I am just in the process of getting this together with the dklm gearbox for the jagdpanther. I hope it will work as nicely as yours "can I shoot daddy?!" ;)
User avatar
c.rainford73
Major
Posts: 6104
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Re: Clark tk60 8 channel setup

Post by c.rainford73 »

Soeren wrote:I am just in the process of getting this together with the dklm gearbox for the jagdpanther. I hope it will work as nicely as yours "can I shoot daddy?!" ;)
Yes my boy Jake loves the tanks ImageHe's my little buddy
Tanks alot.... :wave:
Post Reply

Return to “Clark”