RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build

Post Reply
User avatar
lmcq11
2nd Lieutenant
Posts: 2603
Joined: Mon Dec 19, 2016 7:42 pm
Location: Quebec, Canada

RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build

Post by lmcq11 »

Hi everyone,

As i await parts to finish the M-113 Lynx, its time to start a more complex build, a 1/16 M-24 Chaffee light tank as used by the French Army in the first Indochina War. Ten M-24 Chaffee, named Shaffee by the French were used at Dien Bien Phu, a dramatic battle that will provide the back ground for this build. I find that builds that focus on a specific tank used at a specific battle are very interesting and creates a better bond between the builder and the model, considering the work, time and money involved.

The M24 Chaffee in Indochina, perfectly adapted to the terrain, robust with excellent performance, armor and fire power. One of his main weakness during battle were the batteries, always overused and at risk of being drained. Crews has to rotate the turret with the manual crank and turn off the ventilation fan in order to maintain enough essential power, considerably degrading the crews comfort.

This specific M-24 below has T72E1 tracks and the mounts for the dozer blade. Another reference indicate these are mounting for a flotation device. I am skeptical as i have not seen any photographic evidence of both in operation. Looks like pretty strong mounts for a flotation device.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture4e.JPG (81.97 KiB) Viewed 3449 times
Following the build of the Churchill Mk III tank at Dieppe, i have to admit that i now have a soft spot for doomed battles where tank men fought against all odds and mainly for survival. Dien Bien Phu falls into this category.

First, a brief historical summary of the battle of Dien Bien Phu.

Feeling that they were loosing a guerilla war that had lasted already 8 years, the French high command had the idea in 1953 to create the conditions where Viet Minh forces could be directly engaged in a conventional battle where French superior firepower would destroy them.

The location chosen for the base was the plain of Dien Bien Phu, a monsoon-affected valley surrounded by heavily wooded hills that had not been secured. The cream of the French forces, its elite paratrooper units, would be air dropped to create defensive positions supported by heavy weapons (60 artillery pieces of different calibre, four Quad 4 mounts, and ten M24 Chaffee light tanks) and await the enemy. The base would also provide a position to launch operations in the surrounding areas once the base is reinforced with other units.

Timelines are as follow;
- December 1953 to late February 1954; Operation Castor to take over Dien Bien Phu and build up of forces on both sides.
- March 1954 to May 1954: day and night battle and then capitulation of French forces on May 7.
- July; Geneva conference peace treaty for Indochina.
- September 1954: release of surviving Dien Bien Phu prisoners.

Looking at this map below, we can easily see that creating a forward operating base of 15,000 men so far from its support bases of Hanoi and Haiphong was not a good idea. Considering the French Air forces weakness in heavy transport planes and that the roads to Laos were under the control of the Viet Minh, risks were extremely high. If it difficult to understand how these forces would eventually be pulled out.

The French forces in Indochina had a large contingent of Vietnamese allies and also troops from their African colonies. It is also well known that the French Foreign Legion had a large percentage of Germans. Let's remember that this was 1954, most of the WW2 veterans were long gone. Germany was not allowed to have an army yet at the time so for any German that wanted a life in the military, the French Foreign legion was a clear choice.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture1a.JPG (90.96 KiB) Viewed 3449 times
The plain itself is surrounded by hills. There was no defensive perimeter. The French created instead a series of strong points located on hills that could technically support each other in case of attack. The strong points were given women names like Huguette, Gabrielle, Dominique, Elianne... apparently the names of the commander's mistresses. Two airstrips, build by the Japanese during WW2, would be used for resupply and the base would also have a few Bearcats attack aircrafts.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture2.JPG (66.75 KiB) Viewed 3449 times
View of the landscape outside of the valley. It provided cover for the Viet Minh build up that lasted months prior to the battle, eventually totalling 60,000 men. The French patrols sent as recon into the surrounding jungle were attacked, heavily engaged and had to retreat, the garrison was encircled. The only natural water resource going though the valley, the Nam Yum River, was polluted by the Viet Minh with dead animal carcasses. Another miscalculation by the French, the Viet Minh was able to transport 200 artillery pieces of various calibre, up to 105mm howitzers, through the jungle and hide them behind hills where they could not be found or destroyed by French counter artillery. The Viet Minh observers could see everything the French were doing down in the valley, spot targets and direct artillery fire with pin point accuracy.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture2d.JPG (60.77 KiB) Viewed 3449 times
View of the Dien Bien Phu valley from a hill "strong point" protected by thin laid barb wire good enough to hold cattle... The valley is huge and the garrison was obviously dispersed in multiple small positions. The Viet Minh could therefore pick their battle, attack individual small garrisons one at a time, exhausting the French reserves in futile counter attacks up hill.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture2a.JPG (51.36 KiB) Viewed 3449 times
Mostly devoid of trees and rocks, the landscape provided little material for the construction of fortifications. Only barb wire could be flown in. The on site commander, Colonel de Castries, did not give orders to fortify the camp correctly, other than for his own bunker... The poor de Castries, a simple Colonel, was put in charge of the garrison that would eventually reach 15,000 men and was way over his head. Managing the defense would have required an elite high command, but it was not existing. At the start of the battle, many units were still in tents. Shallow trenches were dug in dirt and did not provide much cover for the heavy Viet Minh artillery barrage that would be unleashed on the garrison. Then the rain started...
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture2b.JPG (78.5 KiB) Viewed 3449 times
Positions around the main airfield was heavily bombed and initial light fortification work were easily destroyed. Wrecked planes lay on the tarmac. Soon after the start of the battle, only air drops could be made to resupply the base, many of which fell to the Viet Minh, including one with a set of aerial photographs intended for the French commander that provided the enemy with a detailed view of all the French positions. Helicopter landing to pick up the wounded also became impossible due to AA.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture2c.JPG (66.12 KiB) Viewed 3449 times
During the build up, ten brand new M-24 Chaffee tanks, code-named Bisons, were airlifted in parts and re-assembled on site. They provided the only mobile forces of the base, split in three platoons, two in the central position and one became isolated at Isabelle. They were used piecemeal as individual fire fighter units during the whole siege, supporting garrisons during attacks, leading counter attacks to retake positions, rescue survivors, and eventually all ten were damaged and then destroyed. They provided extremely valuable services and their presence was a real moral booster for the infantry. Mobile M16 halftracks with .50 calibre quad mounts would have been equally useful but the French only brought in a few static mounts. I am guessing that the M16 would not have lasted long once spotted by the enemy artillery observers.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
The Viet Minh destroyed each strong point piecemeal one after another. French counter attacks supported by the tanks did retake many strong points but with most of its individual local garrison dead or wounded, positions held by a few men with dead officers could not be reinforced and had to be abandoned.

Paratrooper units or individuals sent as reinforcement with no hopes of coming back might not have eaten or slept for 24 hours prior to the night jump. Some landed in the middle of firefights or bombardments and were assigned no bunkers, water or food, and sent asap to hold an area, or strait into battle against waves of Viet Minh infantry. Losses were insupportable. The attempts by the paratrooper mafia (ie Bigeard) to take things over was too late. There would never be enough paratroopers to save Dien Bien Phu and stop the meat grinder...

In the end, after two months of engagement, exhausted and out of resources, with thousands of wounded to take care, the French forces surrendered. About 2,000 French had died, thousands sick or wounded and between 4000 and 8000 Viet Minh were killed. About 12,000 men of the French forces then went into captivity. Captured Vietnamese were treated as traitors, pulled aside and executed. The men were weak after months in the ditches, the rain and half rations. Food before and after capitulation was scarce. The Viet only allowed critical wounded to be evacuated by air. The rest were fed two balls of rice per day and made to march hundreds of km to prison camps. After 4 months of captivity, 9000 had died of disease, neglect and starvation. A dark chapter of French history had ended.

Conclusions:

The French high command Hedgehog (Siege warfare) strategy formulated by Navarre and Berteil for Dien Bien Phu were theories lacking any sense of reality. Dien Bien Phu could not have worked, the French lacked the means to achieve success, they did not control the high grounds, they mainly under-estimated the Viet Minh capabilities while overestimating their own. Worse, the Americans later tried the same strategy at Khe Sanh. A force of 6000 Marines was dropped on a hill in the middle of nowhere. Well, at least they had the high ground. After the North Vietnamese had assembled four divisions in the hope of creating an American Dien Bien Phu. The shelling of the base started and Khe Sanh was quickly surrounded and isolated. The US Air Force then launched "Operation Niagara", dropping 100,000 tons of bombs on the surrounding jungle (tonnage differs depending on sources but averaging 60 B-52 strikes and 350 fighter bomber strikes daily), plus Army support with total of 158,000 artillery rounds. It is estimated that the North Vietnamese lost between 9000 and 13000 combatants at Khe Sahn, likely less in reality, at the cost of 3,500 US and allied forces killed in associated battles and relief attempts during a 5 months period. Despite all the resources available to the US, Khe Sahn had a very similar kill ratio and achievement as the French at Dien Bien Phu. The Marines could and abandoned the base once they had had enough (an important difference with Dien Bien Phu), but the enemy shelling never stopped throughout the battle. The American had the means for such attrition strategy but it was not worth the cost. Multiple tons of bombs were used for every enemy killed. The Siege strategy of Dien Bien Phu was proven to be ineffective no matter the amount of resources and technology involved. In the end, it changed nothing because success is also measured in politics. The general in charge (Westmoreland) was replaced and the fighting moved elsewhere... same story.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture4.JPG (39.53 KiB) Viewed 3449 times
Each of the ten Chaffee had a name, sometimes forts, decorated soldiers or old Napoleonic battles like Pozen, Smolensk, Auerstaedt or Douaumont, or Bazeilles. I have decided to create the mount of the tank unit commander Captain Hervouët, named Conti.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture7.JPG (85.08 KiB) Viewed 3449 times
Continuing on following post.
Last edited by lmcq11 on Sat Jan 29, 2022 11:28 pm, edited 37 times in total.
User avatar
lmcq11
2nd Lieutenant
Posts: 2603
Joined: Mon Dec 19, 2016 7:42 pm
Location: Quebec, Canada

Re: RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Bu

Post by lmcq11 »

During planning on such scratch build project, the first thing to decide is what tracks to use.

There are two kind of M-24 tracks, the early all metal T72E1 below.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture4a.JPG (89.9 KiB) Viewed 3446 times
Or the later T85E1 with rubber shoe.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture4b.JPG (85.37 KiB) Viewed 3446 times
As seen here, and in all pictures of this tank in DBP, Conti was equipped with rubber T85E1. These shots were likely taken early during the quieter shakedown period. Once the fighting started in early March, each tank were under observation and drew heavy artillery fire. Most tank crews were killed by artillery while entering or exiting the tank, or while performing maintenance and resupply.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Captain Hervouet is seen here at his commander's position with his customary beret of the 1st Regiment of Chasseurs. During fighting, one of his hand was crushed by the closing of his hatch after a sudden acceleration, and a bit later the other arm was crushed by the nervous recoil of the overused turret gun. He spend most of the fighting with both arms in plaster.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture5.JPG (94.56 KiB) Viewed 3446 times
The same tanks, Conti, seen here as a destroyed wreck on the battlefield decades after the battle, is shown with metal track... These are obviously not his original tracks. They must have been burned or lost, and the Vietnamese put these on for the display. Notice that each tank is still on the battlefield but they have now been given an individual shelter to protect them from the rain. Its not as romantic as it was. The whole area is now an open air museum and definitely a place i would like to visit one day. The Vietnamese cared a lot more about these Chaffee relics than they did for French prisoners. Same as us with the German Panzers 50 years later...
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture14 conti.JPG (61.78 KiB) Viewed 3446 times
This is the camo used by most Chaffee at DBP, mixture of paint, mud and dried blood. After an engagement, it was customary to load the dead on the back of the supporting Chaffee(s), with the wounded, without lower jaws or legs, trying to hold on to the turret sides for evacuation to a field hospital no more secure than the front line.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture14a.JPG (36.03 KiB) Viewed 3446 times
For the build of the 1/16 model, in addition to walk around books, i will be supported by the Bronco 1/35 scale model of the M24 for dimensions, shapes and details. It is a very detailed model.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
During planning, i did some validation on the use of the Mato metal/rubber Sherman tracks that come with their old plastic M4A1 RC tank. I could see that it had about the right dimension to represent the T85E1 tracks. The only thing to rework are the side pins.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
A T85E1 prototype was made and proven to be workable. The side pins were removed with a hand file and a central pin was created in plastic and glued, after anchor points for the glue had been created on both ends. Looks solid. Modified metal Mato Sherman sprockets will be used with it.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Continuing on following post
Last edited by lmcq11 on Sat Dec 04, 2021 11:24 pm, edited 10 times in total.
User avatar
43rdRecceReg
Major
Posts: 6295
Joined: Fri Jul 31, 2015 11:38 am
Location: North West Highlands, Scotland

Re: RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Bu

Post by 43rdRecceReg »

:O :D Even your typical research, and build prologue for a model, are worth a Tank of the Month award, Louis. :D You set the bar so high that not even Gulliver, the Jolly Green Giant, or the BFG could jump over it! :D
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
User avatar
lmcq11
2nd Lieutenant
Posts: 2603
Joined: Mon Dec 19, 2016 7:42 pm
Location: Quebec, Canada

Re: RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Bu

Post by lmcq11 »

Another key are to pre-plan was the road wheel. We can see that the M-24 road wheels are quite thin to fit the narrow tracks.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture20.JPG (94.03 KiB) Viewed 3443 times
For a US tank, only the Heng Long Pershing and Walker Bulldog could be of use. However, these are way too thick to be realistic.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
I decided to trim them a bit by cutting them in half at the line with a large Dremel fiberglass cutting wheel.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
The two halves are then sanded smooth to re-gluing together.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
An here we have a thinner M-24 road wheel. The diameter itself is about 1.5mm to large but i manage to remove 0.5mm by reducing the thickness of the rubber. This extra mm needs to be accounted for during the hull creation and placement of the suspension arms. There should be at least 3.5mm between road wheel.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Shown here on the right is an example of thinned M-24 roadwheel with an original M-26 on the left. Need 10 of them. The idlers will be another rework of the M-26 road wheel.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture25.JPG (88.02 KiB) Viewed 3443 times
Shown here is the dry fitting of the prototype M-24 road wheel on the prototype track section.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Looking good.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
The return rollers have too much diameter. I managed to reduce the diameter of the wheel by removing the original rubber band and creating a new look. That is the best that could be done with limited work with a Dremel and nail file. Need 6 of them.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
continuing on following post
User avatar
lmcq11
2nd Lieutenant
Posts: 2603
Joined: Mon Dec 19, 2016 7:42 pm
Location: Quebec, Canada

Re: RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Bu

Post by lmcq11 »

I made the return roller prototype a bit narrower as well.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
This is the fit to the track prototype, looking good.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture31.JPG (85.59 KiB) Viewed 3443 times
I decided to invest some time in building the Bronco 1/35 kit in phases to learn about its secrets, it will be at my side for the duration of the build. It is coming with working suspension, tracks, torsion bars... but no spring for the dampers. I guess it is a way to give the builder a new experience because in the end, it all need to be glued to ensure the road wheels are levelled evenly.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture32.JPG (46.79 KiB) Viewed 3443 times
Heng Long M26 suspension will be used. But as the HL suspension arms are a bit longer than the extrapolated size of the 1/35 arm, this will need to be accounted for during the placement of the suspension arms on the 1/16 hull. Plastic and metal dampers are on inventory. I might have to use metal ones under the planned heavy Mato gearbox at the front. I'll see and decide later.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture33.JPG (54.78 KiB) Viewed 3443 times
Overview of the assembled Bronco 1/35 lower hull and suspension that i used for analysis and calculations. Notice that the middle road wheel does not have any damper. It is planned to give it a torsion blade.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Capture34.JPG (95.2 KiB) Viewed 3443 times
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Parts are drawn on plasticard and cut. Because the road wheel have an extra 1.5mm of diameter, i gave the hull an extra 8mm in length to compensate. Over a total length of around 300mm, this extra length will not be noticed, but will allow me to give the 3.5mm of room between the road wheels, and adjust accordingly a mm here and there for the top.

Although these are flat plates, the Chaffee has complex angles on the upper rim to check and recheck 10 times before anything is cut. The base is 4mm millimeter think, the sides are 2mm think. It is important to properly reproduce the thickness of the armor when joints show externally. Reinforcements can later be done inside.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
The lower hull main parts are assembled and compare well to the 1/35 kit.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
The model as it stands today. Next step, the suspension and road wheels.
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Build
Regards, Louis
User avatar
Kaczor
Warrant Officer 1st Class
Posts: 1756
Joined: Fri May 18, 2018 9:58 am
Location: Ciechanow, Poland
Contact:

Re: RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Bu

Post by Kaczor »

Another fanstastic project :)
User avatar
Model Builder 4
2nd Lieutenant
Posts: 2329
Joined: Sun Jul 26, 2015 3:46 pm
Location: South Wales valleys
Contact:

Re: RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Bu

Post by Model Builder 4 »

Outstanding Louis :clap: your research and preparation on each masterpiece that you build is second to none, can already see that this is going to be another show stopper :thumbup:

Cheers,Lee.
Me ? Addicted ? Never !! :crazy:
User avatar
BarryC
2nd Lieutenant
Posts: 2463
Joined: Sun Jan 03, 2016 11:43 am
Location: Savannah, GA. USA

Re: RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Bu

Post by BarryC »

Good start Louis. :thumbup:

Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
User avatar
EAO
Warrant Officer 2nd Class
Posts: 1162
Joined: Sun May 10, 2020 5:29 pm
Location: Central Missouri, U.S. of A.

Re: RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Bu

Post by EAO »

Louis,

You sure know how to pick some interesting projects! As 43rdRR noted, your background research is an amazing journey through history itself!
Watching along with much interest!

Cheers,
Eric.
"You can always tell a German, you just can't tell him much." Anonymous.

German cars, German girls, German beer, German firearms, German Shepherds, German motorcycles... Not necessarily in that order though!

UP THE IRONS!
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: RC 1/16 M-24 Chaffee light tank- Dien Bien Phu 1954 - Bu

Post by Jofaur86 »

https://www.lefigaro.fr/histoire/archiv ... i-1954.php
https://www.defense.gouv.fr/content/dow ... e/MC39.pdf
CEHD.
767E32F7-6082-421C-B6B1-B91187B69745.jpeg
767E32F7-6082-421C-B6B1-B91187B69745.jpeg (47.63 KiB) Viewed 3372 times
Le légendaire Général Giap, en 2004, à l'âge de 92 ans, entouré de vétérans vietnamiens. En 1954, il avait décidé de faire de Dien Bien Phu, la bataille finale. Alors que les Français pensaient ne mener qu'une opération secondaire. Durant 55 jours et 55 nuits, la garnison française subira un déluge de feu. ©AFP
Post Reply

Return to “Modern Builds”