British FV432/30 Bull dog
- HERMAN BIX
- Brigadier
- Posts: 10299
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: British FV432/30 Bull dog
looks like you have a boat load of 'weld' to put on!! That will keep you out of mischief for a while
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
Re: British FV432/30 Bull dog
Hi.
Thank you Mr Bix.
To be honest there is not too much of it on display only bits here and there like hatch hinges etc, its of all steel construction rather than Aluminium, looks like the makers GKN SANKEY were very particular and it was ground off flush from the close up pics i have.
"We british are rather particular about that sort of thing don't you know, it just would not do!"
Regards
Sub.
Thank you Mr Bix.
To be honest there is not too much of it on display only bits here and there like hatch hinges etc, its of all steel construction rather than Aluminium, looks like the makers GKN SANKEY were very particular and it was ground off flush from the close up pics i have.
"We british are rather particular about that sort of thing don't you know, it just would not do!"
Regards
Sub.
Re: British FV432/30 Bull dog
Hi Chaps.
Started work on the engine exhaust silencer and pipe, on this vehicle it is very prominent and large, probably about 1/3 the length of the vehicle, its eliptical in shape mounted externally down the left hand side.
Mounting straps and bolts also added.
Sub.
Started work on the engine exhaust silencer and pipe, on this vehicle it is very prominent and large, probably about 1/3 the length of the vehicle, its eliptical in shape mounted externally down the left hand side.
Mounting straps and bolts also added.
Sub.
Re: British FV432/30 Bull dog
Hi.
Engine exhaust manifold silencer added to left side of hull.
Also added the front exhaust deflection plate.
Sub
Engine exhaust manifold silencer added to left side of hull.
Also added the front exhaust deflection plate.
Sub
-
- Warrant Officer 2nd Class
- Posts: 1311
- Joined: Tue Dec 17, 2019 12:27 am
Re: British FV432/30 Bull dog
It’s things like this that makes me glad that Sherman exhaust pipes are largely out of sight.
Looking good sub
Looking good sub
It’s your tank it’s what you make it
Re: British FV432/30 Bull dog
Hi.
Cheers thank you, it is quite a lump isnt it
Sub.
Cheers thank you, it is quite a lump isnt it
Sub.
-
- Warrant Officer 2nd Class
- Posts: 1311
- Joined: Tue Dec 17, 2019 12:27 am
Re: British FV432/30 Bull dog
You wouldn’t really get away with not putting it on like I could that’s for sure
It’s your tank it’s what you make it
Re: British FV432/30 Bull dog
Hi Chaps,
Further work on the engine exhaust system.
Exit pipe shaped at the tail end and 2 mounting straps added together with the 4 mounting bolts prior to fitting to the hull and silencer.
Further work on the engine exhaust system.
Exit pipe shaped at the tail end and 2 mounting straps added together with the 4 mounting bolts prior to fitting to the hull and silencer.
Re: British FV432/30 Bull dog
Hi.
Exhaust now complete fitted to side of hull.
Just a small ledge to fit under full length of pipe section
Sub.
Exhaust now complete fitted to side of hull.
Just a small ledge to fit under full length of pipe section
Sub.