Greetings,
I used this, picked up at local arts & craft store. It's made in China so possibly available at one of your local arts & craft stores.
Barry
Photo etch
Re: Photo etch
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
Leonardo Da Vinci
Re: Photo etch
Thanks Bud I’ll check it out!!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
My Tanks
Henglong Tiger 1 Early Production
Henglong King Tiger in progress
Henglong Jagdpanther almost complete
Henglong Panzer 4 fresh out of box
Henglong Sherman almost complete
Taigen Tiger 1 Late Production custom build with ELMOD hopefully.
Henglong Tiger 1 Early Production
Henglong King Tiger in progress
Henglong Jagdpanther almost complete
Henglong Panzer 4 fresh out of box
Henglong Sherman almost complete
Taigen Tiger 1 Late Production custom build with ELMOD hopefully.
Re: Photo etch
Hey bud is this something you can get in the states? Tried looking for it but no luck. Do you have a link by chance?BarryC wrote:Greetings,
I used this, picked up at local arts & craft store. It's made in China so possibly available at one of your local arts & craft stores.
Barry
Sent from my iPhone using Tapatalk
My Tanks
Henglong Tiger 1 Early Production
Henglong King Tiger in progress
Henglong Jagdpanther almost complete
Henglong Panzer 4 fresh out of box
Henglong Sherman almost complete
Taigen Tiger 1 Late Production custom build with ELMOD hopefully.
Henglong Tiger 1 Early Production
Henglong King Tiger in progress
Henglong Jagdpanther almost complete
Henglong Panzer 4 fresh out of box
Henglong Sherman almost complete
Taigen Tiger 1 Late Production custom build with ELMOD hopefully.
- tankme
- Warrant Officer 1st Class
- Posts: 1987
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: Photo etch
Barry is in the US so I would say it is available in the US. He bought the copper kind so he could solder it to his brass basket. Any material whether it's plastic, aluminum, etc will work if the mesh looks to be about the right size. Once you fill the basket with stowage you will barely see the mesh anyway.
I'm including some pics of the actual mesh and a scan of the Trumpeter PE set that comes with the M1A1 and A2 1/16 kits. If you print it actual size it can be used as a template that is pretty close. I say pretty close because the Trumpeter kit actually has a size mistake on their turret basket where it hangs over too much on one side. The PE is then cut to fit the mistake. If you use the PE template you have to make sure you shorten the elongated side. You can see what I'm talking about below.
I'm including some pics of the actual mesh and a scan of the Trumpeter PE set that comes with the M1A1 and A2 1/16 kits. If you print it actual size it can be used as a template that is pretty close. I say pretty close because the Trumpeter kit actually has a size mistake on their turret basket where it hangs over too much on one side. The PE is then cut to fit the mistake. If you use the PE template you have to make sure you shorten the elongated side. You can see what I'm talking about below.
Last edited by tankme on Wed Apr 14, 2021 3:31 pm, edited 1 time in total.
Derek
Too many project builds to list...
Too many project builds to list...
Re: Photo etch
Awesome!!!!!! Thank you!!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
My Tanks
Henglong Tiger 1 Early Production
Henglong King Tiger in progress
Henglong Jagdpanther almost complete
Henglong Panzer 4 fresh out of box
Henglong Sherman almost complete
Taigen Tiger 1 Late Production custom build with ELMOD hopefully.
Henglong Tiger 1 Early Production
Henglong King Tiger in progress
Henglong Jagdpanther almost complete
Henglong Panzer 4 fresh out of box
Henglong Sherman almost complete
Taigen Tiger 1 Late Production custom build with ELMOD hopefully.