Page 1 of 4

Daz's Challenger 2 Build

Posted: Tue Jan 01, 2019 10:20 pm
by Docomar750
Hi all Happy New Year

well starting a new project the sherman is still ongoing just need to decide and what to add.

so new project is a Heng Long Challenger 2 basic version plans so far are

detailing with some new [for me] ideas, skills
IBU2U board
after market speaker Dayton Audio PC83-4 3" Full range poly cone driver
Tarr smoker
IR Battle system
Clark Recoil
and im going to have a bash at gun stabilization using some ideas from my RC flying days

heres the tanked arrived
Image

Stripped down
Image

Image

And going to put IR led into sight on gun mantle so opened up the sight door. Oh and cut the barrel ready to fit a gaiter for recoil

Image

Image

Re: Daz's Challenger 2 Build

Posted: Tue Jan 01, 2019 10:39 pm
by c.rainford73
Very nice following along. Want to see how the gun stabilization system works

Re: Daz's Challenger 2 Build

Posted: Tue Jan 01, 2019 10:55 pm
by Son of a gun-ner
Yeah, I shall follow along, and as I have one of these plus a leopard or two, I'll be very interested to see how you deal with the stabilization :thumbup:

Re: Daz's Challenger 2 Build

Posted: Sat Jan 12, 2019 8:40 am
by Docomar750
Little more update not going for uparmoured going to stay with clean look as I like that look going to base on more modern era KRH tank just got to figure out white decals as their markings have a round border. For now just learning new skills as I go and copying what other people have done as this is only my second tank. So build so far:

Hull and turret now magnetised connection no more screws

Battery box removed and hull reinforced
Image

Decide to open all three sights one over gun mantle has IR emitter so no red covering
Image
Image
Image

and fitted Clark recoil for HL Challenger 2
Image

Still lots to as I bought Tankograd reference book and every time I look at it I get more ideas got to stop doing that or will never finish.

Re: Daz's Challenger 2 Build

Posted: Tue Jan 15, 2019 7:40 pm
by Docomar750
Bit more work done during my rota day off,

All solid handles now brass.
Image

Gun travel lock opened and hinged
Image

Image

And drivers hatch and periscope detailed
Image

Image

Re: Daz's Challenger 2 Build

Posted: Sun Jan 20, 2019 3:44 pm
by Docomar750
Update little bit of detailing on the rear end

Image

Image

Re: Daz's Challenger 2 Build

Posted: Sun Jan 20, 2019 8:34 pm
by Docomar750
Ok more work today
Lights nearly finished for painting

Image

Image

Counter weight on recoil mech and barrel smooths operation

Image

First of the periscope wash piping

Image

Re: Daz's Challenger 2 Build

Posted: Sun Jan 20, 2019 8:39 pm
by Docomar750
Close up of the sites you can just see the led bulb mounted behind when the light catches it

Image

Image

Re: Daz's Challenger 2 Build

Posted: Wed Jan 23, 2019 5:34 pm
by Docomar750
Front lights finished and installed

Image

Image

Re: Daz's Challenger 2 Build

Posted: Wed Jan 23, 2019 8:17 pm
by Docomar750
No good check reference book and the deflector plate on the front of the tank is to far back on the HL its further forward on the Chally 2 so deglue sand and polish fill in holes make pins and stick back on slightly back from front lip but close as possible with out interfering with taking upper hull off

Image