Nope, it's gone, you're too late

If you have something you would like to swap for something else, please post it here! (with full details!)
Forum rules
Please make sure you are up to date with this sections rules before creating a thread. The rules can be found here: viewforum.php?f=5078
Locked
User avatar
Lert
Sergeant
Posts: 543
Joined: Sat Apr 19, 2014 6:10 pm
Location: Duiven, Netherlands

Nope, it's gone, you're too late

Post by Lert »

So a few years ago I bought what was advertised as an 88mm L/71 barrel, but what I got was considerably bigger, as is evident in this picture compared to the barrel from my Heng Long JagdPanther:

Image

Here's a close up of the end of the barrel and the muzzle brake:

Image

Some measurements:

- 340mm total length
- 6mm bore
- 10mm thick, 10mm long section at the base
- Then an 89mm long section of 14mm thickness
- After that it tapers from 14mm to 8mm near the muzzle

If we assume 1/16th scale, the barrel would be 5440mm long IRL.

- If it's a scale 105mm barrel, this would make it just under 52 calibers long, so a 105 L/52. There were a few German prototypes with a 105 L/52.
- It it's a scale 128mm barrel, this would make it 42.5 calibers long. I don't think there were any 128mm armed vehicles with an L/42 barrel, I think all the 128s in use were L/55?

The barrel is aluminum, the muzzle brake is brass.

Maybe someone can use it? It's just collecting dust over here.

In return I'll take whatever spare stowage you can spare. I'll happily take:

- Boxes and crates
- Duffel bags
- Jerry cans
- Oil drums
- Camo nets
- Aerial recognition flags (German, Russian)
- Anything else that can be glued to a tank to give it some personality

Alternatively, if you happen to have a spare set of these track link holders I'll also happily take them off your hands:

Image

<Edit> There is an interested party, so the barrel might be claimed.

<Edit2> Yup, it's gone.
Last edited by Lert on Thu Dec 13, 2018 2:13 pm, edited 3 times in total.
JagdPanther / Leopard 2A6 / StuG Ausf. G / KV-2 / M4A3A4 / MTLB / 2.5 ton truck 6x6
mcevoyi
2nd Lieutenant
Posts: 2295
Joined: Fri Sep 26, 2008 11:24 pm
Location: Now Living in Cyprus .... Modellers desart ...

Re: Mystery barrel + muzzle brake for stowage

Post by mcevoyi »

It's a barrel for a tamiya Porsche king tiger
It's made by schumo
Rear find indeed
User avatar
Lert
Sergeant
Posts: 543
Joined: Sat Apr 19, 2014 6:10 pm
Location: Duiven, Netherlands

Re: Mystery barrel + muzzle brake for stowage

Post by Lert »

mcevoyi wrote:It's a barrel for a tamiya Porsche king tiger
You sure? It's significantly longer and thicker than a HL 88mm L/71 barrel, ostensibly the same gun that any KT ever used.
JagdPanther / Leopard 2A6 / StuG Ausf. G / KV-2 / M4A3A4 / MTLB / 2.5 ton truck 6x6
mcevoyi
2nd Lieutenant
Posts: 2295
Joined: Fri Sep 26, 2008 11:24 pm
Location: Now Living in Cyprus .... Modellers desart ...

Re: Mystery barrel+muzzle brake (Schumo KT barrel?) for stow

Post by mcevoyi »

Totally sure because it has the recoil extention on for the tamiya unit
User avatar
Lert
Sergeant
Posts: 543
Joined: Sat Apr 19, 2014 6:10 pm
Location: Duiven, Netherlands

Re: Mystery barrel+muzzle brake (Schumo KT barrel?) for stow

Post by Lert »

mcevoyi wrote:Totally sure because it has the recoil extention on for the tamiya unit
Thanks for letting me know. I'll update the thread title accordingly.

I even have an interested party already.
JagdPanther / Leopard 2A6 / StuG Ausf. G / KV-2 / M4A3A4 / MTLB / 2.5 ton truck 6x6
mcevoyi
2nd Lieutenant
Posts: 2295
Joined: Fri Sep 26, 2008 11:24 pm
Location: Now Living in Cyprus .... Modellers desart ...

Re: Schumo 88mm L/71 for Tamiya Porsche KT, for stowage

Post by mcevoyi »

Image


the base line in red for each barrel ..is the point to measure the length form to compare
The bit to the right of the red line is HL and tamiya adapter to fit there Turrets mounts
The left of the red line is the correct barrel length The
Porsche monoblock barrel was soon replace by the 2 part barrel
As it was easier to replace due to barrel wear ..
mcevoyi
2nd Lieutenant
Posts: 2295
Joined: Fri Sep 26, 2008 11:24 pm
Location: Now Living in Cyprus .... Modellers desart ...

Re: Schumo 88mm L/71 for Tamiya Porsche KT, for stowage

Post by mcevoyi »

Image
User avatar
Will01Capri
2nd Lieutenant
Posts: 2704
Joined: Tue Jul 18, 2017 5:34 pm
Location: South Scotland

Re: Nope, it's gone, you're too late

Post by Will01Capri »

If this is still available, i would like to talk a deal for swaps.
I am restoring a Vintage Tamiya King Tiger and this may work perfectly for my needs.
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?

1/24 Leopard 2 Custom mod

2 many trucks to list!
User avatar
Lert
Sergeant
Posts: 543
Joined: Sat Apr 19, 2014 6:10 pm
Location: Duiven, Netherlands

Re: Nope, it's gone, you're too late

Post by Lert »

Will01Capri wrote:If this is still available
Nope, it's gone, you're too late
JagdPanther / Leopard 2A6 / StuG Ausf. G / KV-2 / M4A3A4 / MTLB / 2.5 ton truck 6x6
User avatar
Will01Capri
2nd Lieutenant
Posts: 2704
Joined: Tue Jul 18, 2017 5:34 pm
Location: South Scotland

Re: Nope, it's gone, you're too late

Post by Will01Capri »

:)
thanks
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?

1/24 Leopard 2 Custom mod

2 many trucks to list!
Locked

Return to “Swaps”