Hello, I was wondering if anyone has an FS-I6 controller and a ibu2 MFU with an FS-IA6B receiver, I have turret rotation, barrel elevation, machine gun cannon fire sounds. What I don't have is engine sounds, and gear box movement.
Does anyone have any ideas or suggestions on what to do please?
Any help would be much appreciated.
I've read thru instructions and can not quite get my head around some of the instructions.
Been looking on the net for information, and still looking.
Many thanks
Sam
Help with ibu2 gearboxes not working
Help with ibu2 gearboxes not working
King tiger
Tiger 1
Panzer IV
Panther
Sherman
Stug iii G
Leopard
And still going
Tiger 1
Panzer IV
Panther
Sherman
Stug iii G
Leopard
And still going
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6931
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: Help with ibu2 gearboxes not working
This is the help section for when you are receiving problems with the forum, NOT your tank.
I'm moving this to Electronics / Extras - IBU2 / IBU3.
I'm moving this to Electronics / Extras - IBU2 / IBU3.
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
- Model Builder 4
- 2nd Lieutenant
- Posts: 2329
- Joined: Sun Jul 26, 2015 3:46 pm
- Location: South Wales valleys
- Contact:
Re: Help with ibu2 gearboxes not working
Hi Sam,
All the functions that you currently have working are normal, to get the engine/motors started you need to initiate them by moving one of the radio sticks in a diagonal direction ( to one of the corners ) for 5 seconds until you hear the engine start up sound, it can depend in which position you hold it on how you have your receiver leads plugged in. Hopefully this is how it works with your fs-i6, all my ibu2 boards are used with a spektrum radio and this is how it works with that
Cheers,Lee.
All the functions that you currently have working are normal, to get the engine/motors started you need to initiate them by moving one of the radio sticks in a diagonal direction ( to one of the corners ) for 5 seconds until you hear the engine start up sound, it can depend in which position you hold it on how you have your receiver leads plugged in. Hopefully this is how it works with your fs-i6, all my ibu2 boards are used with a spektrum radio and this is how it works with that
Cheers,Lee.
Me ? Addicted ? Never !!
Re: Help with ibu2 gearboxes not working
Hi Lee,
Thank you your reply it was really helpful, had the motor running and a few other functions, now I've just got to fine tune it ,
Thank you son of a gun-ner for putting my post in the right spot .
Thanks again
Sam
Thank you your reply it was really helpful, had the motor running and a few other functions, now I've just got to fine tune it ,
Thank you son of a gun-ner for putting my post in the right spot .
Thanks again
Sam
King tiger
Tiger 1
Panzer IV
Panther
Sherman
Stug iii G
Leopard
And still going
Tiger 1
Panzer IV
Panther
Sherman
Stug iii G
Leopard
And still going