IBU2U board works fine, L/R motors not responding!

Discuss the IBU2 & IBU3 here.
Post Reply
User avatar
AtlasTanker
Recruit
Posts: 3
Joined: Tue Apr 09, 2019 3:19 am

IBU2U board works fine, L/R motors not responding!

Post by AtlasTanker »

Hi all, I just installed my IBU2U full-option into my Heng Long M41 Walker Bulldog, and after a few re-calibrations to get everything organized correctly, I've noticed that my tracks aren't responding : / no driving sounds coming from my speaker to tell me that the board knows I am telling the tank to drive either. Here's my setup:

- stock motors connected to stock gearboxes
- Turnigy 7.2V 5000mAh NiMH battery (still has more than half its charge left)
- Spektrum Dx7s 7-CH TX w/ AR8000 8-CH RX (yes, they work together just fine)
- small 8-ohm speaker, properly connected (so the sound is fine)

Is the IBU2U really that sensitive to just a few minutes of driving around? or are my tired, worn-out motors finally dead? My RX-18 Heng Long board did just that the last time I used it in my tank, so it wouldn't surprise me if that's what the issue is.

Any help is appreciated : )
==AtlasTanker==
User avatar
AtlasTanker
Recruit
Posts: 3
Joined: Tue Apr 09, 2019 3:19 am

Re: IBU2U board works fine, L/R motors not responding!

Post by AtlasTanker »

Nevermind, my IBU2U is just being buggy. I swapped my track controls back to the right stick, and turret controls back to the left stick, and it works fine now. The IBU2 is really buggy : /
==AtlasTanker==
User avatar
tomhugill
Captain
Posts: 4745
Joined: Thu Apr 15, 2010 11:21 am

Re: IBU2U board works fine, L/R motors not responding!

Post by tomhugill »

AtlasTanker wrote:Nevermind, my IBU2U is just being buggy. I swapped my track controls back to the right stick, and turret controls back to the left stick, and it works fine now. The IBU2 is really buggy : /
Sounds like user error
Post Reply

Return to “IBU2 / IBU3”