Before The tank begins to move there was a short movement of the forward lever of the controller that would allow the engine to rev up while the tank set still. I am running the ibu2 full meal deal and have done a lot of editing, all so far so good, but can't figure out what I changed that eliminated this cool little feature.
And my KT won a 1st place in the RC section of a modeling show Saturday.
Thanks,
Steve
Engine revving
Engine revving
King Tiger, Panzer "G" model, Tiger 1, and one little Sherman.
Re: Engine revving
Steve, could it be you have changed the inertia settings......just a thought. Well done on your win.
Take care..........Gary
Re: Engine revving
InertiaOnOff=3;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8
This is how it is set- maybe there is a line in there that has it on at startup and I didn't understand what inertia was.
InertiaInit=1;0=Inertia OFF, 1=Inertia ON (at start up)
InertiaType=1;1=Inertia curve 1, up to 6=Inertia curve 6
I just changed the setting to on at startup. Should the curve be a 2 or 3?
Thanks!
Steve
This is how it is set- maybe there is a line in there that has it on at startup and I didn't understand what inertia was.
InertiaInit=1;0=Inertia OFF, 1=Inertia ON (at start up)
InertiaType=1;1=Inertia curve 1, up to 6=Inertia curve 6
I just changed the setting to on at startup. Should the curve be a 2 or 3?
Thanks!
Steve
King Tiger, Panzer "G" model, Tiger 1, and one little Sherman.
Re: Engine revving
Hello Steve,
No error in your ini file, if you have the Base version the inertia curve is only one (1)
If you have a full option board you can choose between five more curve (2..6)
About the missing revving sound you can check if the line " EngineRevving=RevUp.wav,100 " is present and the filename called is correct (same name) and present into Tank folder
Thanks
Ivano
No error in your ini file, if you have the Base version the inertia curve is only one (1)
If you have a full option board you can choose between five more curve (2..6)
About the missing revving sound you can check if the line " EngineRevving=RevUp.wav,100 " is present and the filename called is correct (same name) and present into Tank folder
Thanks
Ivano
Re: Engine revving
EngineRevving=RevUp.wav,100 is in exactly like you said. This is the full option board.
If I change the inertia to 3 or 4 what does that do?
Thanks
Steve
If I change the inertia to 3 or 4 what does that do?
Thanks
Steve
King Tiger, Panzer "G" model, Tiger 1, and one little Sherman.
Re: Engine revving
Thank you ibu2man - for revving one needs to move the stick full down quickly. Works like a charm -
Thanks
Steve
Thanks
Steve
King Tiger, Panzer "G" model, Tiger 1, and one little Sherman.