• Advertisement
Welsh Dragon Models

Delays on IBU2U

Postby Lotuswins » Mon Nov 13, 2017 1:56 am

Hi All,

New to the forum, but have a question on the IBU2U:

Anyone notice a 1/2 second or so delay on cannon fire?

and on a side note, perhaps the same issue, if I ease into throttle, it revs and moves. If I got to full throttle quickly it won't do anything, ignoring the input.

This is on a newly constructed Taigen Panther F kit with their 390 motors/4:1 gearboxes, Turnigy 9X radio, airsoft turret (airsoft turned off when I get the delay).

I have three other tanks with the earlier IBU2 base, and this delay isn't present.

Thanks,

Jerry Rude
Roseburg, Oregon, USA

Lotuswins
Recruit
 
Posts: 19
Joined: Sat Jul 22, 2017 4:34 pm

Postby c.rainford73 » Mon Nov 13, 2017 2:08 am

Hi Jerry although we would like to help you and do our best to assist you with your tank please take the time to post a bit about yourself in the introduction section of the forum. I see your from the States like myself and many others on here!

All the best :wave:

Carl
User avatar
c.rainford73
Lieutenant
 
Posts: 3489
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Postby Lotuswins » Mon Nov 13, 2017 2:36 am

Thanks Carl, I did the intro...didn't see that!! Jerry

Lotuswins
Recruit
 
Posts: 19
Joined: Sat Jul 22, 2017 4:34 pm

Postby c.rainford73 » Mon Nov 13, 2017 2:41 am

Lotuswins wrote:Thanks Carl, I did the intro...didn't see that!! Jerry
Much appreciated Jerry.
User avatar
c.rainford73
Lieutenant
 
Posts: 3489
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Postby c.rainford73 » Mon Nov 13, 2017 4:03 am

So to discuss your IBU2U board you are experiencing a short delay of function or sounds when you fire the gun and the unit recoils?

I have two of these boards and actually enjoy them quite a bit for thier sounds and functions.

Have you gone into the board settings on the SD card and checked the parameters?

For instance my M1a2 has a much more pronounced recoil speed than my JS-2. I just made some adjustments in the files to achieve this.

Do tell all information you have to help make it a bit easier to figure out.

As for the full throttle response, I've not experienced this with either tank. They are very responsive and either go slow or very fast.

Any other details Jerry?

Carl
User avatar
c.rainford73
Lieutenant
 
Posts: 3489
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Postby Lotuswins » Mon Nov 13, 2017 6:43 am

Hi Carl,

Yes, I've been in there editing to get things the way I want, almost identical to the other IBU2 base boards. I've attached a copy of the .ini file in case you can spot something I may have messed up on. The tank has airsoft, but I've put it on the mechanical recoil since I intend to put IR on the tank, and I have a remote switch installed in the tank, controlled by channel 5 in the radio, to interrupt the airsoft motor when I don't want it to fire a pellet but still want recoil and cannon sound (i.e. IR battling). Note that I also get static on the speaker when firing the cannon, which doesn't show up on the other IBU2 base installations I've done. Speaker is a visaton FR7 speaker.

To be specific, I will have the tank started, and I push the switch on the radio and 1/2 second or so later the cannon will fire with the recoil of the tracks. The radio has no delay in the signal that I can detect, same settings as on the other tanks with IBU2 base (except opposite direction for some reason - IBU2U needs positive 100% on channel 3 for gun fire, all the IBU2 bases needs negative 100% on channel 3).

Any help much appreciated!

thanks, jerry
Attachments
ibu2u.ini
(10.98 KiB) Downloaded 21 times

Lotuswins
Recruit
 
Posts: 19
Joined: Sat Jul 22, 2017 4:34 pm

Postby c.rainford73 » Tue Nov 14, 2017 4:32 am

Hi there Jerryvery long day at work. I couldn't open the file you posted so I sent you a pm.

Here's what I've found when setting up and using my IBU2U boards. I've not had to change any specific settings on my turningy 9xrpro radio other than mapping certain channels to seperate functions. Same as my IBU2 or Clark tk60 boards.

As for volume and sound crackling and distortion I was dealing with this with the JS-2 specifically and after talking back and forth with Ian ( Mr Tankbear on the forum) I went into the files and set the overall volume at 70%.

Distortion and static gone

I'm running a very nice Visaton FRS 7s speaker and enclosure from Mr Maxmekker here on the forum and now I can crank up the volume and no static from engine rev or main gun fire.

Same settings on my M1A2 with the IBU2U.

I've yet to experience a delay on the main gun with either tank but when I originally setup the Abrams I went into the file to change some things and did notice a difference in response time to both the servo recoil and servo turret rotation.

Can you post a video of the gun recoil and static sounds?

All the best

Carl
User avatar
c.rainford73
Lieutenant
 
Posts: 3489
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Postby Lotuswins » Fri Nov 17, 2017 2:14 am

Hi Carl,

Reducing the volume seems to have helped the static noise issue, thanks a bunch!!

I can't seem to upload the video from my computer (50MB .MOV file). Not sure if you can reduce the size though, it is a very short video.

jerry

Lotuswins
Recruit
 
Posts: 19
Joined: Sat Jul 22, 2017 4:34 pm

Postby maxmekker » Fri Nov 17, 2017 12:53 pm

[quote="Lotuswins"]Hi Carl,

Reducing the volume seems to have helped the static noise issue, thanks a bunch!!

I can't seem to upload the video from my computer (50MB .MOV file). Not sure if you can reduce the size though, it is a very short video.

jerry[/quote

Best to use youtube and ore vimeo for video Clips

and then use the 'VIDEO' button up in R corner when making a New post in the tread

forum (Small).jpg
forum (Small).jpg (72.66 KiB) Viewed 174 times



[video][/video]'

and insert url link in between

phpBB [video]
User avatar
maxmekker
Warrant Officer 2nd Class
 
Posts: 1166
Joined: Tue Apr 27, 2010 8:47 am
Location: Norway

Postby c.rainford73 » Fri Nov 17, 2017 6:58 pm

Jerry glad the noise is under control. if you have time post the details as Mr Maxmekker has advised and we can see any issues with the parameters with your settings.

Carl
User avatar
c.rainford73
Lieutenant
 
Posts: 3489
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Postby Lotuswins » Wed Nov 29, 2017 1:40 am

Okay, lets see if this works?

phpBB [video]

Lotuswins
Recruit
 
Posts: 19
Joined: Sat Jul 22, 2017 4:34 pm

Postby Lotuswins » Wed Nov 29, 2017 1:55 am

Great, thanks all for the help in posting the video. Also, I have been fiddling with the tank a bit and added a relay so I can use the airsoft mode 1 (mechanical recoil) which initiates sound/recoil at the end of the airsoft windup. The relay is picked up when the airsoft mode is not selected (a switch on channel 5 of the receiver), and the gun function is pressed (negative pulse on the 'gun' pin of the turret connector). The relay contact then parallels the airsoft contacts to the board to initiate recoil and cannon sound. I thought it would speed things up a bit, eliminating the delay but I'm not sure it was effective as it still seems slow to fire.

I did this on my Taigen KV-1 tank which is basically stock, and the relay will pick up when the airsoft switch in the turret is off and the elevation stick is pushed forward. The normally open contact on this relay, which parallels the contacts on the airsoft unit will close, momentarily, initiating the cannon sound and recoil (along with IR LED). So I can IR battle with sound and recoil but no airsoft pellet.

thanks, jerry

Lotuswins
Recruit
 
Posts: 19
Joined: Sat Jul 22, 2017 4:34 pm

Postby c.rainford73 » Wed Nov 29, 2017 2:06 am

Hi Jerry in the video it appears that the switch is tripped on the radio and then pulled back again and the recoil mechanism activates, am I correct?

Just checking as it looks like it took two functions to trigger the recoil tracks pulling back. It was a short video so I've watched it several times to try and figure it out.

If you fire by directly pulling the stick on the left or right toward the fire main gun position is it also delayed?

On my IBU2U in the Js-2 it's immediately fired once I pull the stick. Something must be amiss.

What servo recoil setup are you using ?
User avatar
c.rainford73
Lieutenant
 
Posts: 3489
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Postby Lotuswins » Wed Nov 29, 2017 4:09 am

The first flick of the switch was apparently too quick for the board to recognize, so on the second flick I held it longer so it would fire. I don't have a servo barrel recoil, just track recoil set as below:

Here is my .ini file since you couldn't download mine I uploaded:

EngineOnOff=2;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8
LightsOnOff=4;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8
InertiaOnOff=1;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8
SmokeOnOff=3;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8
RemoteVolume=0;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8
OptionalSounds=0;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8

MotorOnRadioOff=0; 0=Engine shut down when the TX signal is lost, 1=Engine remain on with idle sound present when TX signal is lost

BatteryType=1;0=NiMh, 1=LiPo
BatteryCount=0;0=6NiMH/2LiPo, 1=8NiMh/3LiPo

TankType=0;0=Combat tank, 1=Recovery tank (Berge)
TankClass=2;0=Ultra light, 1=Light, 2=Medium, 3=Heavy

TsDirection=0;0=normal, 1=reverse
TsSpeed=20;Servo speed, min value 1, max value 100 (milliseconds) increasing value will slow down movement
TsType=0;0=normal, 1=360 deg. (continous rotation servo)
TsNeutralPosition=1500;Neutral position value, minimum value 1200, maximum value 1800 (milliseconds)
TsMinPosition=1000;Minumum position value, minimum value 900, maximum value 1500 (milliseconds)
TsMaxPositon=2000;Maximum position value, minimum value 1600, maximum value 2100 (milliseconds)

BsDirection=0;0=normal, 1=reverse
BsSpeed=20;Servo speed, min value 1, max value 100 (milliseconds) increasing value will slow down movement
BsType=0;0=normal, 1=360 deg. (continous rotation servo)
BsNeutralPosition=1500;Neutral position value, minimum value 1200, maximum value 1800 (milliseconds)
BsMinPosition=1000;Minumum position value, minimum value 900, maximum value 1500 (milliseconds)
BsMaxPositon=2000;Maximum position value, minimum value 1600, maximum value 2100 (milliseconds)

MrType=1;0=mechanical recoil, 1=mechanical airsoft
MrPulseTime=1575;Duration recoil pulse, minimum value 100, maximum value 9999 (milliseconds) used only for recoil type 0

RsDirection=0;0=normal, 1=reverse
RsReturnMode=0;0=linear, 1=logarithmic
RsRecoilTime=500;Barrel recoil speed, min value 100, max value 9999 (milliseconds)
RsReturnTime=1000;Barrel return speed, min value 100, max value 9999 (milliseconds)
RsMinPosition=1000;Minumum position value, minimum value 900, maximum value 1500 (milliseconds)
RsMaxPositon=2000;Maximum position value, minimum value 1600, maximum value 2100 (milliseconds)

InertiaInit=0;0=Inertia OFF, 1=Inertia ON (at start up)
InertiaType=1;1=Inertia curve 1, up to 6=Inertia curve 6
LightsInit=0;0=Lights OFF, 1=Lights ON (at start up)
TailLightIntensity=25;Value range 1 - 100 (%) set the brightness of tail lights
Flasher=1;0=Extendes signalling OFF, 1=Extended signalling ON
SmokeInit=0;0=Smoke generator OFF, 1=Smoke generator ON (at start up)
MinSmoke=50;Value range 1 - 100 (%) set the speed of proportional output with engine idling
MaxSmoke=100;Value range 1 - 100 (%)

GbType=0;0=Standard, 1=Clutch (Tamiya/DKLM)
GbCurrent=10;Value range 10 - 20 (Ampere) set current treshold for motor cut-off
GbSuperspin=0;Value range 1 - 100 (%) set superspin speed
GbMinPowerLeft=1;Value range 1 - 100 (%) set minimum power feed to left gearbox motor / Tamiya-DKLM steer left-right
GbMaxPowerLeft=100;Value range 1 - 100 (%) set maximum power feed to left gearbox motor / Tamiya-DKLM steer left-right
GbMinPowerRight=1;Value range 1 - 100 (%) set minimum power feed to left gearbox motor / Tamiya-DKLM forward-reverse
GbMaxPowerRight=100;Value range 1 - 100 (%) set maximum power feed to right gearbox motor / Tamiya-DKLM forward-reverse
GbReverse=100;Value range 1 - 100 (%) set reverse speed
TrackRecoilTime=15;Value range 1 - 1000 (milliseconds) set track recoil duration
TrackRecoilSpeed=25;Value range 1 - 100 (%) set track recoil speed
TrackRecoilDirection=1;0=normal, 1=reverse set track recoil direction
BrakeSimulation=1;0=normal, 1=brake simulation
TgDirection=0;0=normal, 1=reverse direction of traverse gearbox
BgDirection=0;0=normal, 1=reverse direction of barrel gearbox

MasterVolume=100;Value range 0 - 100 (%) set maximum overall volume level
IdleLimitedVolume=80;Value range 0 - 100 (%) idle volume when other sounds are present
EngineColdStart1=EstartC_1.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
EngineColdStart2=EstartC_2.wav,100
EngineColdStart3=EstartC_3.wav,100
EngineWarmStart1=EstartW_1.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
EngineWarmStart2=EstartW_2.wav,100
EngineWarmStart3=EstartW_3.wav,100
EngineStop1=Estop_1.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
EngineStop2=Estop_2.wav,100
EngineStop3=Estop_3.wav,100
EngineIdle=Eidle.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
EngineRevving=RevUp.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
EngineRelease=RevDw.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
EngineStep1=Es01.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
EngineStep2=Es02.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
EngineStep3=es03.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
EngineStep4=Es04.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
Brake=RevDw.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
Squeak1=Sk06.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Squeak2=Sk07.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Squeak3=sk08.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Squeak4=Sk09.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Squeak5=Sk10.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
TurretEngineOff=Turr_off_1.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
TurretEngineOn=Turr_on_2.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
BarrelEngineOff=Turr_off_2.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
BarrelEngineOn=Turr_on_2.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Cannon1=88kwk36_1.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Cannon2=88kwk36_2.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Cannon3=88kwk36_3.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Mg1=MG34_1.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Mg2=MG34_2.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Mg3=MG42_1.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Hit1=hit_1.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Hit2=hit_2.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Hit3=hit_3.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Dead1=Explosion_1.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Dead2=Explosion_2.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Dead3=Explosion_3.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) random played
Rebirth=7th_Cavalry.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
Repair=repair1.wav;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
Slider1=Ger_voice_1.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
Slider2=Ger_voice_2.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
Slider3=Ger_voice_3.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
Slider4=preus.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz)
LowBattery=0021.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
BatteryCutOff=0022.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
Inactivity=0023.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
SystemReady=0024.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
InitCalibration=0001.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
EndCalibrationOk=0002.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
EndCalibrationKo=0003.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
4ChSound=0004.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
5ChSound=0005.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
6ChSound=0006.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
7ChSound=0007.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
8ChSound=0008.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
BarrelStickUp=0009.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
BarrelStickDown=0010.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
TraverseStickLeft=0011.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
TraverseSticKRight=0012.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
EngineSticKUp=0013.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
EngineSticKDown=0014.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
SteeringSticKLeft=0015.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
SteeringSticKRight=0016.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
Channel5Assign=0017.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
Channel6Assign=0018.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
Channel7Assign=0019.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file
Channel8Assign=0020.wav,100;Sound file .ibu format or .wav (mono, 16 bit, 22050 Hz) Do not delete either name or memory sound file

Lotuswins
Recruit
 
Posts: 19
Joined: Sat Jul 22, 2017 4:34 pm

Postby c.rainford73 » Wed Nov 29, 2017 4:22 am

Hi Jerry. I figured you didn't have barrel recoil now it makes sense . I saw the track recoil and now I see this in your file....

TrackRecoilSpeed=25;Value range 1 - 100 (%) set track recoil speed

What I did notice is your track recoil speed is set at 25% has this been changed? I've limited mine to enhance the servo gun recoil but in your case it might make sense to speed it up.

Are you OK with the volume and static issues I see the master volume is still set at 100% or it's OK and you have accomplished fixing this? I set mine at 70% if that helps.
User avatar
c.rainford73
Lieutenant
 
Posts: 3489
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Postby Lotuswins » Wed Nov 29, 2017 4:24 am

Oh, yes, it is delayed if I set the 'GUN' on the 9x to 100 percent and move the elevation (left stick) forward fully (like a stock tank). I have the switch on the transmitter programmed to give 100 percent gun elevation. I compared another tank with the IBU2 base to this one, and the IBU2U is definitely slower by about 1/2 second or so. It just seems slow to react to receiver input.

jerry

Lotuswins
Recruit
 
Posts: 19
Joined: Sat Jul 22, 2017 4:34 pm

Postby Lotuswins » Wed Nov 29, 2017 4:29 am

Sorry, yes my volume is now at 70%, I just haven't corrected the stored file on my computer which is what I posted.

On the track recoil speed, I did fiddle with that since my wheels on this tank are all ball bearing, and no rubber on the wheels so it is very free wheeling. So I lowered the track recoil speed to minimize it rolling backwards yet still had some recoil.

Lotuswins
Recruit
 
Posts: 19
Joined: Sat Jul 22, 2017 4:34 pm

Postby c.rainford73 » Wed Nov 29, 2017 4:32 am

Lotuswins wrote:Sorry, yes my volume is now at 70%, I just haven't corrected the stored file on my computer which is what I posted.

On the track recoil speed, I did fiddle with that since my wheels on this tank are all ball bearing, and no rubber on the wheels so it is very free wheeling. So I lowered the track recoil speed to minimize it rolling backwards yet still had some recoil.
Try adjusting it back to a more aggressive setting and see if the recoil speed is more responsive. It maybe more responsive when recoiling.
User avatar
c.rainford73
Lieutenant
 
Posts: 3489
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Postby Lotuswins » Wed Nov 29, 2017 4:39 am

Sorry, but I may have posted an earlier .ini file, here is the current one.....track recoil speed is at 1.....I wanted a sharp, short duration recoil....best I could do to minimize tank coasting backwards:

EngineOnOff=2;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8
LightsOnOff=4;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8
InertiaOnOff=1;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8
SmokeOnOff=3;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8
RemoteVolume=0;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8
OptionalSounds=0;0=NOT_USED, 1=UPSX_DIAG, 2=UPDX_DIAG, 3=DOWNSX_DIAG, 4=DOWNDX_DIAG, 5=CH5, 6=CH6, 7=CH7, 8=CH8

MotorOnRadioOff=0; 0=Engine shut down when the TX signal is lost, 1=Engine remain on with idle sound present when TX signal is lost

BatteryType=1;0=NiMh, 1=LiPo
BatteryCount=0;0=6NiMH/2LiPo, 1=8NiMh/3LiPo

TankType=0;0=Combat tank, 1=Recovery tank (Berge)
TankClass=2;0=Ultra light, 1=Light, 2=Medium, 3=Heavy

TsDirection=0;0=normal, 1=reverse
TsSpeed=20;Servo speed, min value 1, max value 100 (milliseconds) increasing value will slow down movement
TsType=0;0=normal, 1=360 deg. (continous rotation servo)
TsNeutralPosition=1500;Neutral position value, minimum value 1200, maximum value 1800 (milliseconds)
TsMinPosition=1000;Minumum position value, minimum value 900, maximum value 1500 (milliseconds)
TsMaxPositon=2000;Maximum position value, minimum value 1600, maximum value 2100 (milliseconds)

BsDirection=0;0=normal, 1=reverse
BsSpeed=20;Servo speed, min value 1, max value 100 (milliseconds) increasing value will slow down movement
BsType=0;0=normal, 1=360 deg. (continous rotation servo)
BsNeutralPosition=1500;Neutral position value, minimum value 1200, maximum value 1800 (milliseconds)
BsMinPosition=1000;Minumum position value, minimum value 900, maximum value 1500 (milliseconds)
BsMaxPositon=2000;Maximum position value, minimum value 1600, maximum value 2100 (milliseconds)

MrType=1;0=mechanical recoil, 1=mechanical airsoft
MrPulseTime=1575;Duration recoil pulse, minimum value 100, maximum value 9999 (milliseconds) used only for recoil type 0

RsDirection=0;0=normal, 1=reverse
RsReturnMode=0;0=linear, 1=logarithmic
RsRecoilTime=500;Barrel recoil speed, min value 100, max value 9999 (milliseconds)
RsReturnTime=1000;Barrel return speed, min value 100, max value 9999 (milliseconds)
RsMinPosition=1000;Minumum position value, minimum value 900, maximum value 1500 (milliseconds)
RsMaxPositon=2000;Maximum position value, minimum value 1600, maximum value 2100 (milliseconds)

InertiaInit=0;0=Inertia OFF, 1=Inertia ON (at start up)
InertiaType=1;1=Inertia curve 1, up to 6=Inertia curve 6
LightsInit=1;0=Lights OFF, 1=Lights ON (at start up)
TailLightIntensity=25;Value range 1 - 100 (%) set the brightness of tail lights
Flasher=1;0=Extendes signalling OFF, 1=Extended signalling ON
SmokeInit=0;0=Smoke generator OFF, 1=Smoke generator ON (at start up)
MinSmoke=100;Value range 1 - 100 (%) set the speed of proportional output with engine idling
MaxSmoke=100;Value range 1 - 100 (%)

GbType=0;0=Standard, 1=Clutch (Tamiya/DKLM)
GbCurrent=10;Value range 10 - 20 (Ampere) set current treshold for motor cut-off
GbSuperspin=0;Value range 1 - 100 (%) set superspin speed
GbMinPowerLeft=0;Value range 1 - 100 (%) set minimum power feed to left gearbox motor / Tamiya-DKLM steer left-right
GbMaxPowerLeft=100;Value range 1 - 100 (%) set maximum power feed to left gearbox motor / Tamiya-DKLM steer left-right
GbMinPowerRight=0;Value range 1 - 100 (%) set minimum power feed to left gearbox motor / Tamiya-DKLM forward-reverse
GbMaxPowerRight=100;Value range 1 - 100 (%) set maximum power feed to right gearbox motor / Tamiya-DKLM forward-reverse
GbReverse=50;Value range 1 - 100 (%) set reverse speed
TrackRecoilTime=1;Value range 1 - 1000 (milliseconds) set track recoil duration
TrackRecoilSpeed=30;Value range 1 - 100 (%) set track recoil speed
TrackRecoilDirection=0;0=normal, 1=reverse set track recoil direction
BrakeSimulation=1;0=normal, 1=brake simulation
TgDirection=0;0=normal, 1=reverse direction of traverse gearbox
BgDirection=0;0=normal, 1=reverse direction of barrel gearbox

MasterVolume=70;Value range 0 - 100 (%) set maximum overall volume level

Sans all the sound programming.....

Lotuswins
Recruit
 
Posts: 19
Joined: Sat Jul 22, 2017 4:34 pm

Postby Lotuswins » Wed Nov 29, 2017 4:42 am

Okay, I'll try that, thanks....I'll let you know.

Lotuswins
Recruit
 
Posts: 19
Joined: Sat Jul 22, 2017 4:34 pm

Next

Return to IBU2 / IBU3

Who is online

Users browsing this forum: No registered users and 1 guest