Dimensions of the Slip Ring?
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Dimensions of the Slip Ring?
Hi Folks,
Does anyone know the dimension of this Slip Ring sold by RC Legions, specifically the diameter?
https://www.rctanklegion.com/products/s ... 2-wires-2a
TIA,
Barry
Does anyone know the dimension of this Slip Ring sold by RC Legions, specifically the diameter?
https://www.rctanklegion.com/products/s ... 2-wires-2a
TIA,
Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
Leonardo Da Vinci
-
- Warrant Officer 2nd Class
- Posts: 1312
- Joined: Tue Dec 17, 2019 12:27 am
Re: Dimensions of the Slip Ring?
To me it looks exactly like the toro ones you can get from forgebear if that’s of any help
It’s your tank it’s what you make it
-
- Warrant Officer 2nd Class
- Posts: 1312
- Joined: Tue Dec 17, 2019 12:27 am
Re: Dimensions of the Slip Ring?
I will take the diameter of the one in my t34 if needed
It’s your tank it’s what you make it
Re: Dimensions of the Slip Ring?
Is it the same one that RC Legion is selling? If it is and not a bother I would greatly appreciate it.Exhibitedbrute wrote:I will take the diameter of the one in my t34 if needed
TIA,
Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
Leonardo Da Vinci
Re: Dimensions of the Slip Ring?
I’ll measure it when I get home from work.
Re: Dimensions of the Slip Ring?
Thanks Jimster!Jimster wrote:I’ll measure it when I get home from work.
Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
Leonardo Da Vinci
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6931
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: Dimensions of the Slip Ring?
I think the Mato one forgebear sells is possibly a different make, but could have been produced in the same factory.
- Attachments
-
- 20201223_214308.jpg (61.69 KiB) Viewed 1138 times
-
- s558706699898873938_p94_i5_w160.jpeg (54.19 KiB) Viewed 1138 times
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
Re: Dimensions of the Slip Ring?
Hi Mick,
I was looking at it with reference to the cutting mat. It looks like it is 40mm ish in length and 20mm ish in diameter.
Barry
I was looking at it with reference to the cutting mat. It looks like it is 40mm ish in length and 20mm ish in diameter.
Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
Leonardo Da Vinci
Re: Dimensions of the Slip Ring?
I measured the ring to be 1.726” and the length 2.045”. Give or take a grey hair.
Of course the wire bundle increases the realistic overall length a bit.
Sent from my iPhone using Tapatalk
Of course the wire bundle increases the realistic overall length a bit.
Sent from my iPhone using Tapatalk
Re: Dimensions of the Slip Ring?
Thanks my friend!
What I need is the diameter of the barrel, that which your holding in your fingers in the last pic.
Barry
What I need is the diameter of the barrel, that which your holding in your fingers in the last pic.
Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
Leonardo Da Vinci