How to bind a taigen MFU?

Rad_Schuhart · Post by **Rad_Schuhart** » Wed Jul 15, 2020 10:15 am

Hi guys, a friend has a Taigen MFU with that external sound card, and he wants to bind it with the stock transmitter.
I have not seen that set up in my life, so I have no clue how it works. What does he need to do, step by step?

He will have a programable radio soon (I am making one for him) how is that one supposed to be connected? I know hobby grade radios can be used, but I have not seen how to connect the receiver to the board

Thanks!

EDIT: Now my friend is using a hobby grade transmiter (9x) and he cannot make it work. What is he missing?

Max-U52 · Post by **Max-U52** » Wed Jul 15, 2020 10:25 am

If it's a V3 it came with six cables to connect the hobby grade TX, and it should have instructions for the order.

To bind the TX you hold down the machine gun button, turn on the TX and the tank, keep holding the button until the light on the TX stops blinking, release the button, throw the switch on the opposite shoulder and the tank should start.

Rad_Schuhart · Post by **Rad_Schuhart** » Wed Jul 15, 2020 10:53 am

Max-U52 wrote:If it's a V3 it came with six cables to connect the hobby grade TX, and it should have instructions for the order.

To bind the TX you hold down the machine gun button, turn on the TX and the tank, keep holding the button until the light on the TX stops blinking, release the button, throw the switch on the opposite shoulder and the tank should start.

Hi mate, he got super old instructions with the tank, from old henglong with chrystals electronics...

Does he need to do something with the binging plug? To remove it after bingding?

Thanks!

Rad_Schuhart · Post by **Rad_Schuhart** » Wed Jul 15, 2020 12:42 pm

Ok, my friend managed to do it. Thanks again!

Rad_Schuhart · Post by **Rad_Schuhart** » Sun Sep 13, 2020 1:19 pm

Hi, some news here. My friend is trying to use his new hobby radio with the taigen electronics but for some reason it is not working.

So far, the receiver is bound to the radio and works, 100% sure.

He connected the wires from the taigen MFU to his receiver. He connected the 6 channels.
He plugged that smal plug where he has to.

When he powers the tank, the fan starts spinning and the receiver is powered. We tested a servo on channel 7 and he can control it.

But it seems there is no way to start the tank. He flicks channel 5 and nothing happens. What is he missing? Thanks!

Rad_Schuhart · Post by **Rad_Schuhart** » Sun Sep 13, 2020 5:29 pm

I am also surprised I cannot find any info of people using hobby radios with the board. Also no videos in youtube, no nothing...

Jofaur86 · Post by **Jofaur86** » Sun Sep 13, 2020 5:43 pm

Hello Rad..

I don't know if I can help

I just know that know avlat of problems with this turntable ??

Rad_Schuhart · Post by **Rad_Schuhart** » Sun Sep 13, 2020 5:46 pm

Jofaur86 wrote:Hello Rad..
I don't know if I can help I just know that know avlat of problems with this turntable ??
IMG_6585.JPG

Thank you very much for the intention, friend.
Yeah, we already got that diagram, but for some reason he cannot make it work. I wonder if he is missing something...

Jofaur86 · Post by **Jofaur86** » Sun Sep 13, 2020 5:47 pm

There seems to be a button ? To choose whether or not the Tank recoils from the shoot

Jofaur86 · Post by **Jofaur86** » Sun Sep 13, 2020 5:54 pm

https://www.taigentanks.com/pages/manuals-diagrams

RC Tank Warfare community hobby forum

How to bind a taigen MFU?

How to bind a taigen MFU?

Re: How to bind a taigen MFU?

Re: How to bind a taigen MFU?

Re: How to bind a taigen MFU?

Re: How to bind a taigen MFU?

Re: How to bind a taigen MFU?

Re: How to bind a taigen MFU?

Re: How to bind a taigen MFU?

Re: How to bind a taigen MFU?

Re: How to bind a taigen MFU?