IBU2 + Taigen Recoil

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
User avatar
Kaczor
Warrant Officer 1st Class
Posts: 1755
Joined: Fri May 18, 2018 9:58 am
Location: Ciechanow, Poland
Contact:

IBU2 + Taigen Recoil

Post by Kaczor »

Hello everybody. Could somebody help me with IBU2 problem? After installation in Taigen tank with IR and recoil, there is no return of gun after firing (with Taigen board there is no issue). Could it be because of "ground" cable (it's going to limit switch on recoil)? Where it should be connected on IBU2 board?
Attachments
taigen.jpg
taigen.jpg (17.56 KiB) Viewed 375 times
User avatar
c.rainford73
Major
Posts: 6104
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Re: IBU2 + Taigen Recoil

Post by c.rainford73 »

The ground goes to the negative to the battery. If it's a 360 degree turret it should go to the blue wire in the harness. It doesn't go to the board itself. Go on the IBU website and download the manual and follow the pictures.
Tanks alot.... :wave:
User avatar
Kaczor
Warrant Officer 1st Class
Posts: 1755
Joined: Fri May 18, 2018 9:58 am
Location: Ciechanow, Poland
Contact:

Re: IBU2 + Taigen Recoil

Post by Kaczor »

Yes. That was it. Thank you ;)
User avatar
c.rainford73
Major
Posts: 6104
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Re: IBU2 + Taigen Recoil

Post by c.rainford73 »

The stock taigen tank has the other end of this cable somewhere if I remember correctly :wave:
Tanks alot.... :wave:
User avatar
c.rainford73
Major
Posts: 6104
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Re: IBU2 + Taigen Recoil

Post by c.rainford73 »

Excellent news :thumbup:
Tanks alot.... :wave:
Post Reply

Return to “General Questions”