Hex drivers

[Ragnar]

Buying a set of quality hex drivers and I’m curious whether the hex screws on most our RC tanks are metric or SAE. I’m assuming the former.

[c.rainford73]

From my experience they are metric. I did however but a complete set of both for my scratch builds too!

[Ragnar]

From my experience they are metric. I did however but a complete set of both for my scratch builds too!

I already have a drawer full of sae allen wrench’s lol

[jarndice]

For the smaller heads I find that a set of BA sockets and a set of BA Spanners will often work when the Metric will not.

[Son of a gun-ner]

For the smaller heads I find that a set of BA sockets and a set of BA Spanners will often work when the Metric will not.

Gosh, that's a blast from the past. I have BA spanners and sockets somewhere. Only come across BA these days in old electrical stuff like conduits.

And I think you'll find that they're talking about Allen Keys Shaun, not box spanners/nut drivers.

[jarndice]

I avoid using glue whenever possible,
If I use nuts and bolts I can undo stuff without damaging the tank,
I have found that a small BA open ended spanner will get into places that Metric spanners will not and no it does not round off the heads,
Almost every small size Metric nut will work with a BA spanner or a BA Socket.
I got my BA Sockets from a Porsche Main Dealer of all places.
Oh and I do have just about every size Hex driver going.

[General Jumbo01]

From my experience the Allen bolts are metric so a set of metric hex drivers is what you need. BangGood do a cheap handy driver with 4 interchangeable sized metric tips. Needs less storage, keeps things tidy and much cheaper!

Sent from my ASUS_T00G using Tapatalk

[Ragnar]

Bought this set off amazon!nice to not have to mess around finding and changing tips.

[Son of a gun-ner]

Thank you Mr Ragnar, I too have a tin full of all sizes of Allen Keys, but the thanks are for reminding me I purchased a set of hex drivers some time back and forgot I had lol.