old tamiya with 11mm drive axles

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
ronnie42
Staff Sergeant
Posts: 834
Joined: Sun Feb 04, 2018 11:00 am

old tamiya with 11mm drive axles

Post by ronnie42 »

Who does 11mm ID bearings for supporting drive axles , problem is axle is IN 2 parts and you need to be able to get to the grub screw. Done a temporary fix with a nylon bearing sleeve.
Used nylon sleeve drilled out to 11mm and cut down .
Used nylon sleeve drilled out to 11mm and cut down .
A bit blurred . Drilled hole for grub screw, dark bit at top of nylon sleeve.
A bit blurred . Drilled hole for grub screw, dark bit at top of nylon sleeve.
Top
Post Reply

Return to “General Questions”