Page 1 of 1

super pershing gun barrel dimensions

Posted: Thu Mar 14, 2019 2:57 pm
by Ludwig von wigbearer
Hi all, could somone help me out with the dimensions of the super pershing gun barrel, i have read the length
should be around 28cm for 1/16 but cant find diameter and does the barrel taper, if so i would like to know the diameter of either end.

regards john :wave:

Re: super pershing gun barrel dimensions

Posted: Thu Mar 14, 2019 8:03 pm
by Jofaur86
Hello,
Good evening,
Not the dimensions gun,but plenty of other informations :thumbup:
http://67400.free.fr/monsiteweb/Char%20 ... rshing.htm

Re: super pershing gun barrel dimensions

Posted: Thu Mar 14, 2019 8:14 pm
by Ad Lav
Dklm sell one for about $35 I think :)

Re: super pershing gun barrel dimensions

Posted: Thu Mar 14, 2019 8:18 pm
by Jofaur86

Re: super pershing gun barrel dimensions

Posted: Thu Mar 14, 2019 8:21 pm
by Jofaur86
Hello,
Good evening,
Not the dimensions gun,but plenty of other informations :thumbup:
http://67400.free.fr/monsiteweb/Char%20 ... rshing.htm

Re: super pershing gun barrel dimensions

Posted: Sun Mar 17, 2019 7:44 am
by Ad Lav
John did you work it out?

I’m sure MK modellbau can make you a nice Aluminium one or Dklm does this one... :)

https://www.dklmrc.com/%5BDK%5D_Metal_B ... 17790.aspx

Re: super pershing gun barrel dimensions

Posted: Sun Mar 17, 2019 10:57 am
by Ludwig von wigbearer
Hi Adam and thanks for the link to the site, at the moment have to sort tracks and other items out for the
build so the barrel will have to wait a while, being a bit of a tight ass i was hoping to do a blue peter and mackle one together from sticky back plastic and milk bottle tops ;)
i have 2 heng long pershing turrets so might be able to make an acceptable barrel from the two :thumbup:

regards john

Re: super pershing gun barrel dimensions

Posted: Sun Mar 17, 2019 11:22 am
by Tiger6
I've stretched all of mine to the correct length for the standard 90mm, its quite simple to do as the alluminium BB inner barrel holds the whole thing together nicely.
Using a razor saw rather than a junior hacksaw will give you a neater cut that will cover up better :thumbup:

Re: super pershing gun barrel dimensions

Posted: Sun Mar 17, 2019 11:57 am
by Ludwig von wigbearer
Thank you for your info Tiger6 :thumbup:

regards john :wave: