Do Mato metal sprockets and idlers fit on HL tanks?
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
-
- Recruit
- Posts: 38
- Joined: Sat Dec 15, 2018 7:52 pm
- Location: New Port Richey, FL
Do Mato metal sprockets and idlers fit on HL tanks?
Do Mato metal sprockets and idlers fit on HL tanks without modification? Thought I read somewhere that the shaft size is different?
- forgebear
- Warrant Officer 1st Class
- Posts: 1808
- Joined: Fri Nov 21, 2008 11:15 pm
- Location: bedford
- Contact:
Re: Do Mato metal sprockets and idlers fit on HL tanks?
we do the track kits with the heng long sprockets and idlers to
https://www.forgebeartanks.com/store/p1 ... _Tank.html
https://www.forgebeartanks.com/store/p1 ... _Tank.html
Re: Do Mato metal sprockets and idlers fit on HL tanks?
I'd say yes. Except noone really wants to leave the HL idler attachment system because no tensioner is there. And when you go for something else the idlers may be a problem. They have a self tapper and the bearing is 5mm so good luck making a firm setup.
Sent from my POCOPHONE F1 using Tapatalk
Sent from my POCOPHONE F1 using Tapatalk
Started as a tank man.
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
- forgebear
- Warrant Officer 1st Class
- Posts: 1808
- Joined: Fri Nov 21, 2008 11:15 pm
- Location: bedford
- Contact:
Re: Do Mato metal sprockets and idlers fit on HL tanks?
or you could do a small amount of dremel work and fit this to your heng long
https://www.forgebeartanks.com/store/p1 ... uster.html
https://www.forgebeartanks.com/store/p1 ... uster.html
Re: Do Mato metal sprockets and idlers fit on HL tanks?
Hi it can depend on the offset of the sprocket some may need a different gearbox longer or shorter shafts.
regards pete
But the will fit
regards pete
But the will fit
-
- Recruit
- Posts: 38
- Joined: Sat Dec 15, 2018 7:52 pm
- Location: New Port Richey, FL
Re: Do Mato metal sprockets and idlers fit on HL tanks?
Thanks for all the responses fellas! I should be more specific, these will be mounting on a HL Tiger 1 with HL steel gearboxes, hopefully without too many issues. I do enjoy tinkering with these things to make them work!
Re: Do Mato metal sprockets and idlers fit on HL tanks?
Good, I think I know many answers to questions you are not yet aware of.Jim Reeves wrote:Thanks for all the responses fellas! I should be more specific, these will be mounting on a HL Tiger 1 with HL steel gearboxes, hopefully without too many issues. I do enjoy tinkering with these things to make them work!
First what are gonna do with the idlers?
Started as a tank man.
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
-
- Recruit
- Posts: 38
- Joined: Sat Dec 15, 2018 7:52 pm
- Location: New Port Richey, FL
Re: Do Mato metal sprockets and idlers fit on HL tanks?
I have the Mato metal idlers as well. Awaiting the steel gearboxes before I make this change.