t34 /tarr smoker help
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
t34 /tarr smoker help
Hi Lads nearly done my taigen t34/85 with a IBU2U, all I can say lovely kit runs very well and helped all the way by Dave and Ian, just one last thing to finish, how has other tankers rigged up the t34 to a tarr1 smoker? it seems when I shut the top it bends the tubes and cuts of the smoke, any advice more than welcome . glen
-
- Corporal
- Posts: 292
- Joined: Sun Jul 17, 2011 9:11 pm
- Location: The Chilly and Flat part of the Netherlands' North.
Re: t34 /tarr smoker help
Stick a piece of straightened paperclip in the tubing. That’ll keep the tubing open enough for the smoke to work.
- Raminator
- Warrant Officer 2nd Class
- Posts: 1266
- Joined: Tue Aug 11, 2015 9:57 am
- Location: Newcastle, Australia
Re: t34 /tarr smoker help
Whereabouts did you install the Tarr, Glen? I've got mine perpendicularly between the gearboxes:
Re: t34 /tarr smoker help
same as you ruminator between the gearboxes
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7399
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: t34 /tarr smoker help
Good morning,
I notice that the tubing comes straight up out of the top of your smoker. Have you considered using those 'L' shaped tubing redirectors that HL and Taigen use on their smokers? *rummages around for a link*
regards,
Painless
http://www.imex-model.com/assets/Image/ ... 120613.jpg
https://www.youtube.com/watch?v=XS8_ax1zwp8
I notice that the tubing comes straight up out of the top of your smoker. Have you considered using those 'L' shaped tubing redirectors that HL and Taigen use on their smokers? *rummages around for a link*
regards,
Painless
http://www.imex-model.com/assets/Image/ ... 120613.jpg
https://www.youtube.com/watch?v=XS8_ax1zwp8
...Here for the Dawn...
- jarndice
- Colonel
- Posts: 8003
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: t34 /tarr smoker help
I use Flexible Drinking straws,
They are a firm fit,
They come with different flexible sections,
Go for the Longest of the flexible section drinking straws.
And They are cheap and can be easily trimmed to fit.
They are a firm fit,
They come with different flexible sections,
Go for the Longest of the flexible section drinking straws.
And They are cheap and can be easily trimmed to fit.
I think I am about to upset someone