Challenger 2 idler adjusters broken

[spongehoobtank82]

Hey up guys been I while since I posted as been playing/working on airsoft guns for past 12 months, hope everyone is well seems I have missed loads! Got back to fixing the challenger after 8 months since the plastic idler adjuster decided to disintegrate and the only solution was the dklm metal adjuster which is just too expensive (is it still like 200-300quid?) so decided too 'borrow' the henntec adjuster from my leopard 2a6, took some major modification and grinding and also looks nothing like the original but its in a relatively hidden spot! And does the job!
Just wondered if anyone else had had similar problems and come up with a better solution? It seem a weak spot as done it twice! Will try get some pics up soon.

[spongehoobtank82]

So here's some photos of what I destroyed and the botch I did to fix it, not pretty but it works!

FB_IMG_1527935979266.jpg (67.81 KiB) Viewed 275 times

Destroyed idler I guess upgraded drive train was too much

FB_IMG_1527935976995.jpg (45.98 KiB) Viewed 275 times

Had to grind back some of the lower front Hull plate and then plasticard spacers to bring the idler out in line with the track guide horns

FB_IMG_1527935974495.jpg (74.59 KiB) Viewed 275 times

FB_IMG_1527935971730.jpg (57.36 KiB) Viewed 275 times

FB_IMG_1527935968751.jpg (80.27 KiB) Viewed 275 times

You can see the plasticard spacers bolted and glued to the side Hull here, at least there out the way!

FB_IMG_1527935962235.jpg (72.49 KiB) Viewed 275 times