1920 x 1080 or slightly smaller at 72 dpi, jpg, nope, doesn't work today.
Or most another days.
John
Tamiya full-option King Tiger zimmerit
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Re: Tamiya full-option King Tiger zimmerit
Here's my Atak zimmerit on HL Koenigstiger......
(I hadn't removed the clear transfer film at this point)
(I hadn't removed the clear transfer film at this point)
Tiger 1 Early Taigen,
Tiger 1 Mid Torro,
Tiger 1 Late Taigen,
King Tiger Taigen (P)
Jagdtiger Torro
King Tiger (H)
King Tiger Torro (H)
Tiger 1 late Torro
Panther G Taigen
Tiger 1 Mid Torro,
Tiger 1 Late Taigen,
King Tiger Taigen (P)
Jagdtiger Torro
King Tiger (H)
King Tiger Torro (H)
Tiger 1 late Torro
Panther G Taigen
- 43rdRecceReg
- Major
- Posts: 6295
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Tamiya full-option King Tiger zimmerit
Very nicely done, Tiggr.; judging by this pic. This seems like more evidence of Atak zimmerit quality....
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6295
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Tamiya full-option King Tiger zimmerit
You're not using Preview there..or if you are, it must be with a very early version of Mac OS. That file's over 4 megs, but should reduce easily to below 350kb with little loss of detail.Samurai Modeler wrote:1920 x 1080 or slightly smaller at 72 dpi, jpg, nope, doesn't work today.
Or most another days.
John
Here's a Picture I took of KT 341; a tank currently being restored at the Swiss Military museum. The Preview resize window is very basic, and really simple to use. The original shot was over 4megs, but here it has been reduced to around 331kb, and the screen 'grab' down to 288kb: It's rarely necessary to alter the resolution, but I often pick the 'Custom' option where I can select from a range of sizes. or, I simply reduce the height or width, the rest is sorted automatically after clicking 'save'. It never fails. On my Cromwell
thread, I felt it necessary to post lots of pics and, never had a glitch using Preview. Hope this helps.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- jackalope
- Lieutenant
- Posts: 3885
- Joined: Fri Jun 20, 2014 7:42 pm
- Location: Communist State of Maryland, United States.
Re: Tamiya full-option King Tiger zimmerit
Tiggr wrote:Here's my Atak zimmerit on HL Koenigstiger......
(I hadn't removed the clear transfer film at this point)
That looks good! How does the rear look? Mine didn't fit too well.
Re: Tamiya full-option King Tiger zimmerit
jackalope wrote:Tiggr wrote:Here's my Atak zimmerit on HL Koenigstiger......
(I hadn't removed the clear transfer film at this point)
That looks good! How does the rear look? Mine didn't fit too well.
I had the same experience as you Jack, I suppose the "pukka" way to do it would have been to remove the exhausts and other kit before applying it.
Just looked at it, then compared it to the Torro KT I have.
The Torro version has no zimmerit on the back plate !
Tiger 1 Early Taigen,
Tiger 1 Mid Torro,
Tiger 1 Late Taigen,
King Tiger Taigen (P)
Jagdtiger Torro
King Tiger (H)
King Tiger Torro (H)
Tiger 1 late Torro
Panther G Taigen
Tiger 1 Mid Torro,
Tiger 1 Late Taigen,
King Tiger Taigen (P)
Jagdtiger Torro
King Tiger (H)
King Tiger Torro (H)
Tiger 1 late Torro
Panther G Taigen