Metal or plastic?
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Re: Metal or plastic?
I have just, this morning, fitted metal tracks and drive sprockets to my bulldog, along with the already fitted metal gearboxes. I'm yet to find a supplier of metal idlers or road wheels for a bulldog, seems theres endless parts for the Tiger, but not for the Bulldog or Pershing.
- Roboticus_Prime
- Corporal
- Posts: 381
- Joined: Mon Sep 14, 2015 7:05 pm
Re: Metal or plastic?
Luckily, the Bulldog and Pershing have the same running gear. The only difference is the Pershing's auto tensioning front idler arms. The components can sometimes be found on ebay, aliexpress, or tankarmy.combikerdude wrote:I have just, this morning, fitted metal tracks and drive sprockets to my bulldog, along with the already fitted metal gearboxes. I'm yet to find a supplier of metal idlers or road wheels for a bulldog, seems theres endless parts for the Tiger, but not for the Bulldog or Pershing.
A warning about adding metal suspension to the Pershing. You'll need to make sure that the track runs strait and with a tight enough tension, or this will happen:
RP RC
Hey, I got an idea...
Tanks: HL M26 Pershing, HL M1A2 Abrams, Taigen M4 76, HL M45 Pershing, 1/18 PZ IV, VS Abrams, [coming soon]
Hey, I got an idea...
Tanks: HL M26 Pershing, HL M1A2 Abrams, Taigen M4 76, HL M45 Pershing, 1/18 PZ IV, VS Abrams, [coming soon]
- Roboticus_Prime
- Corporal
- Posts: 381
- Joined: Mon Sep 14, 2015 7:05 pm
Re: Metal or plastic?
Here's my build thread for mine.
viewtopic.php?f=22&t=17993
Since the Pershing is not very popular for some reason, there's not a whole lot of info about building in 1/16 RC. I did get a lot of advice from the guys at RCU, but I still had to figure a lot of this out on my own.
viewtopic.php?f=22&t=17993
Since the Pershing is not very popular for some reason, there's not a whole lot of info about building in 1/16 RC. I did get a lot of advice from the guys at RCU, but I still had to figure a lot of this out on my own.
RP RC
Hey, I got an idea...
Tanks: HL M26 Pershing, HL M1A2 Abrams, Taigen M4 76, HL M45 Pershing, 1/18 PZ IV, VS Abrams, [coming soon]
Hey, I got an idea...
Tanks: HL M26 Pershing, HL M1A2 Abrams, Taigen M4 76, HL M45 Pershing, 1/18 PZ IV, VS Abrams, [coming soon]
Re: Metal or plastic?
Thanks, funnily enough thats who I've ordered the tensioner for the Tiger from, and I spent nearly an hour looking through all their adverts looking for Bulldog stuff, completely missed those road wheels! Though they will have to wait for now, can't afford that at the moment. I assume it is 'road wheels' all the way along, so would need 6 pairs, or do you reckon a pair is the 2 halves of 1 wheel? Added to my watch list.Son of a gun-ner wrote:Found you some metal idlers.
I've purchased from this guy in Hong Kong, and was very happy with the service.
But obviously if you choose to go with him, it's at your own risk.
He says to ask about other items, or you can look through his endless stock for your road wheels lol.
http://m.ebay.co.uk/itm/182082557569?_mwBanner=1
Mick.
P.S. you say metal gearboxes, if they are the white metal type, they may not be strong enough for these type of motors, you'll need steel.
Whats happened there? Has it ripped a tyre off the wheel? I think the Tiger and Pershing will be staying with plastic tracks and wheels, just metal gearboxes. The plastic is holding up well with the kids and if they do manage to break it, it's cheap enough to replace.Roboticus_Prime wrote:Luckily, the Bulldog and Pershing have the same running gear. The only difference is the Pershing's auto tensioning front idler arms. The components can sometimes be found on ebay, aliexpress, or tankarmy.combikerdude wrote:I have just, this morning, fitted metal tracks and drive sprockets to my bulldog, along with the already fitted metal gearboxes. I'm yet to find a supplier of metal idlers or road wheels for a bulldog, seems theres endless parts for the Tiger, but not for the Bulldog or Pershing.
A warning about adding metal suspension to the Pershing. You'll need to make sure that the track runs strait and with a tight enough tension, or this will happen:
Nice build log, I'll read the rest later.
- Roboticus_Prime
- Corporal
- Posts: 381
- Joined: Mon Sep 14, 2015 7:05 pm
Re: Metal or plastic?
That's exactly what happened. Several times before I got the tracks aligned.bikerdude wrote: Whats happened there? Has it ripped a tyre off the wheel? I think the Tiger and Pershing will be staying with plastic tracks and wheels, just metal gearboxes. The plastic is holding up well with the kids and if they do manage to break it, it's cheap enough to replace.
Nice build log, I'll read the rest later.
RP RC
Hey, I got an idea...
Tanks: HL M26 Pershing, HL M1A2 Abrams, Taigen M4 76, HL M45 Pershing, 1/18 PZ IV, VS Abrams, [coming soon]
Hey, I got an idea...
Tanks: HL M26 Pershing, HL M1A2 Abrams, Taigen M4 76, HL M45 Pershing, 1/18 PZ IV, VS Abrams, [coming soon]
- Roboticus_Prime
- Corporal
- Posts: 381
- Joined: Mon Sep 14, 2015 7:05 pm
Re: Metal or plastic?
That pic looks like one idler that's been split into it's two halves.Son of a gun-ner wrote:Found you some metal idlers.
I've purchased from this guy in Hong Kong, and was very happy with the service.
But obviously if you choose to go with him, it's at your own risk.
He says to ask about other items, or you can look through his endless stock for your road wheels lol.
http://m.ebay.co.uk/itm/182082557569?_mwBanner=1
Mick.
P.S. you say metal gearboxes, if they are the white metal type, they may not be strong enough for these type of motors, you'll need steel.
RP RC
Hey, I got an idea...
Tanks: HL M26 Pershing, HL M1A2 Abrams, Taigen M4 76, HL M45 Pershing, 1/18 PZ IV, VS Abrams, [coming soon]
Hey, I got an idea...
Tanks: HL M26 Pershing, HL M1A2 Abrams, Taigen M4 76, HL M45 Pershing, 1/18 PZ IV, VS Abrams, [coming soon]
- Roboticus_Prime
- Corporal
- Posts: 381
- Joined: Mon Sep 14, 2015 7:05 pm
Re: Metal or plastic?
Here's where I usually find parts for the Pershing and Bulldog.
http://tankarmy.com/heng-long-tank/inde ... pcohjsf267
Parts tend to be cheaper, but the international shipping is high. So, it's better to buy a bunch of stuff at once.
http://tankarmy.com/heng-long-tank/inde ... pcohjsf267
Parts tend to be cheaper, but the international shipping is high. So, it's better to buy a bunch of stuff at once.
RP RC
Hey, I got an idea...
Tanks: HL M26 Pershing, HL M1A2 Abrams, Taigen M4 76, HL M45 Pershing, 1/18 PZ IV, VS Abrams, [coming soon]
Hey, I got an idea...
Tanks: HL M26 Pershing, HL M1A2 Abrams, Taigen M4 76, HL M45 Pershing, 1/18 PZ IV, VS Abrams, [coming soon]
Re: Metal or plastic?
Roboticus_Prime wrote:Here's where I usually find parts for the Pershing and Bulldog.
http://tankarmy.com/heng-long-tank/inde ... pcohjsf267
Parts tend to be cheaper, but the international shipping is high. So, it's better to buy a bunch of stuff at once.
I really need to work on my searching skills! I do believe I stumbled upon that site while looking for metal sprockets for the Pershing, even with the p&p it worked out cheaper than from the 1 uk supplier I could find. Now I must resist the temptation to place a stupidly big order for many many parts... I do like the look of that 360 turret rotation too, just don't know which version I'd need. Looks like I'll need to sell a few of my model boats to free up some cash!