Well the video turned out worse than I expected. The phone did something to the sound. TG black steel is way worse in real life.
Sent from my iPhone using Tapatalk
Gearbox Ratio Help
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Re: Gearbox Ratio Help
Started as a tank man.
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
- PershingLover
- Corporal
- Posts: 309
- Joined: Thu Dec 05, 2019 11:37 pm
- Location: Sweden
Re: Gearbox Ratio Help
Honestly, the sound isn't that bad. Unless of course the audio was changed up. I didn't know the taigen smoker was proportional. Does it need a Taigen board to work?
Re: Gearbox Ratio Help
It didn’t sound as loud in real life.
The smoker is upgraded with a proportional board. Easy fix.
Sent from my iPhone using Tapatalk
The smoker is upgraded with a proportional board. Easy fix.
Sent from my iPhone using Tapatalk
Started as a tank man.
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
- PershingLover
- Corporal
- Posts: 309
- Joined: Thu Dec 05, 2019 11:37 pm
- Location: Sweden
Re: Gearbox Ratio Help
How loud are the Hl Ultimate? Does anyone know?
Re: Gearbox Ratio Help
Looking at the black cogs my guess is quite a bit. Like TG 4:1 easily.PershingLover wrote:How loud are the Hl Ultimate? Does anyone know?
Sent from my iPhone using Tapatalk
Started as a tank man.
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
- General Jumbo01
- Warrant Officer 1st Class
- Posts: 1763
- Joined: Sat Jul 14, 2018 8:06 pm
- Location: I'm a Londoner that moved to Essex. Says it all really...:(
Re: Gearbox Ratio Help
A good idea. I just have a set. Anyone wanna buy?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Started as a tank man.
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
- Roboticus_Prime
- Corporal
- Posts: 381
- Joined: Mon Sep 14, 2015 7:05 pm
Re: Gearbox Ratio Help
Like Gary, I use the 4:1's on my WWII tanks too. Plus, I think they work better for metal tanks.
I just use some molly grease. It's a bit thin, so I made some shields out of styrene to keep the splatter down.
As for the noise, both my Pershing and my Sherman have the same Taigen V2 gearboxes. I have noticed that the Metal hull Sherman produces much less gear noise that the Pershing. I suspect it has to do with being mounted to solid metal, and reducing vibrations. I have also seen a guy use some type of sound-dampening tape used in car stereos to reduce the gear noise.
I just use some molly grease. It's a bit thin, so I made some shields out of styrene to keep the splatter down.
As for the noise, both my Pershing and my Sherman have the same Taigen V2 gearboxes. I have noticed that the Metal hull Sherman produces much less gear noise that the Pershing. I suspect it has to do with being mounted to solid metal, and reducing vibrations. I have also seen a guy use some type of sound-dampening tape used in car stereos to reduce the gear noise.
RP RC
Hey, I got an idea...
Tanks: HL M26 Pershing, HL M1A2 Abrams, Taigen M4 76, HL M45 Pershing, 1/18 PZ IV, VS Abrams, [coming soon]
Hey, I got an idea...
Tanks: HL M26 Pershing, HL M1A2 Abrams, Taigen M4 76, HL M45 Pershing, 1/18 PZ IV, VS Abrams, [coming soon]