Hi all,
I ordered a recoil unit for my HL Tiger 1 but it didn't come with the two parts that attach to the mantlet. The parts are designated as BB6 & BB7 by Taigen.
Does anybody know where I can get these pieces so that I can get my recoil unit fitted and get the BB unit out!??
If anybody has some obviously I'm willing to purchase them!
Cheers, Dave
Taigen parts required for Tiger 1 recoil unit
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Taigen parts required for Tiger 1 recoil unit
Tanks for the memory?
- capt midnight
- Corporal
- Posts: 497
- Joined: Wed Oct 28, 2015 4:22 am
- Location: Southern Indiana
Re: Taigen parts required for Tiger 1 recoil unit
I just put one of those in my Stug III Ausf A conversion, and I had the same problem. The mounting trunions are rare as hen's teeth. Did you order the unit thas already has the Tiger 1 mantlet with it, or is it just the universal one? Taigen has the unit with the mounting trunions and flash unit included listed on their web site, but it has been out of stock for several months now.
Sorry I couldn't be of more help.
Bill
Sorry I couldn't be of more help.
Bill
"Yeah, but it's a dry heat!"
Private Hudson (Bill Paxton) ALIENS
Private Hudson (Bill Paxton) ALIENS
Re: Taigen parts required for Tiger 1 recoil unit
I don't know what parts might be available, but perhaps Ian might have them? He's been great on some of these things in the past for me, so who knows?
https://www.rctankelectronics.com/
Or perhaps these guys. I purchased great quality parts from them in the past, so maybe they can help you?
https://www.dklmrc.com/
https://www.rctankelectronics.com/
Or perhaps these guys. I purchased great quality parts from them in the past, so maybe they can help you?
https://www.dklmrc.com/
I used to be indecisive. Now, I'm not sure..
- 43rdRecceReg
- Major
- Posts: 6295
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Taigen parts required for Tiger 1 recoil unit
Those two parts should have come with the recoil unit. If you check the Taigentanks website, you'll see the wee white pivot flanges (trunnions) illustrated as part of the deal. Here:
https://www.taigentanks.com/taigen-part ... /tag120054
http://www.imex-model.com/TANK%20MANUAL ... 1.html#p=4
Dave (Forgebear) is an authorised Taigen dealer in the UK, a legendary good guy, and forum member. Try emailing him from this contact page:
https://www.forgebeartanks.com/contact.html
Good luck.
https://www.taigentanks.com/taigen-part ... /tag120054
http://www.imex-model.com/TANK%20MANUAL ... 1.html#p=4
Dave (Forgebear) is an authorised Taigen dealer in the UK, a legendary good guy, and forum member. Try emailing him from this contact page:
https://www.forgebeartanks.com/contact.html
Good luck.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6295
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Taigen parts required for Tiger 1 recoil unit
You didn't say where you'd ordered the parts from. All the sites I've just checked seem to include the bits that are absent from your purchase. Rctank's parts section shows a bag of fittings with the recoil unit, just as one example. https://www.rctank.de/Tiger-I-gun-actio ... gun-holder
I'm sure this is the norm. It would be worth taking the missing bits issue up with your vendor.
I'm sure this is the norm. It would be worth taking the missing bits issue up with your vendor.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
Re: Taigen parts required for Tiger 1 recoil unit
Hi, I got the unit from Welsh Dragon Models. Wasn't sure if they came with unit or not, just my luck to get the one with bits missing!!!43rdRecceReg wrote:You didn't say where you'd ordered the parts from. All the sites I've just checked seem to include the bits that are absent from your purchase. Rctank's parts section shows a bag of fittings with the recoil unit, just as one example. https://www.rctank.de/Tiger-I-gun-actio ... gun-holder
I'm sure this is the norm. It would be worth taking the missing bits issue up with your vendor.
Hey ho, I'll probably not use it now as I might upgrade to a clark board and servo recoil!! Might need to sell it on me thinks!!
Dave
Tanks for the memory?
- 43rdRecceReg
- Major
- Posts: 6295
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Taigen parts required for Tiger 1 recoil unit
Steve at Welsh Dragon is a member here, and a certified 'good guy' amongst vendors. I note that he sells two flavours of recoil for the Tiger 1. One comes without mantlet (and therefore the white pivots/trunnions).davejay wrote:Hi, I got the unit from Welsh Dragon Models. Wasn't sure if they came with unit or not, just my luck to get the one with bits missing!!!43rdRecceReg wrote:You didn't say where you'd ordered the parts from. All the sites I've just checked seem to include the bits that are absent from your purchase. Rctank's parts section shows a bag of fittings with the recoil unit, just as one example. https://www.rctank.de/Tiger-I-gun-actio ... gun-holder
I'm sure this is the norm. It would be worth taking the missing bits issue up with your vendor.
Hey ho, I'll probably not use it now as I might upgrade to a clark board and servo recoil!! Might need to sell it on me thinks!!
Dave
The other includes the mantlet- here:
https://www.welshdragonmodels.co.uk/tai ... 1744-p.asp
It would be worth phoning him to see whether he'll supply the parts you need. There's a good chance he will.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
Re: Taigen parts required for Tiger 1 recoil unit
43rdRecceReg wrote:Thanks for that. I got the one without the manlet as I had just obtained a metal turret/barrel/mantlet from evilbay and a taigen upper hull.davejay wrote:Hi, I got the unit from Welsh Dragon Models. Wasn't sure if they came with unit or not, just my luck to get the one with bits missing!!!43rdRecceReg wrote:You didn't say where you'd ordered the parts from. All the sites I've just checked seem to include the bits that are absent from your purchase. Rctank's parts section shows a bag of fittings with the recoil unit, just as one example. https://www.rctank.de/Tiger-I-gun-actio ... gun-holder
I'm sure this is the norm. It would be worth taking the missing bits issue up with your vendor.
Hey ho, I'll probably not use it now as I might upgrade to a clark board and servo recoil!! Might need to sell it on me thinks!!
Dave
Just one of those things I guess especially when you're new to rd tanks and upgrading as well.
My Tiger 1 is almost done except for fitting a clark board, servo recoil and flash.
Saving up now for a 1/6 Chally!!!!!
Dave
Steve at Welsh Dragon is a member here, and a certified 'good guy' amongst vendors. I note that he sells two flavours of recoil for the Tiger 1. One comes without mantlet (and therefore the white pivots/trunnions).
The other includes the mantlet- here:
https://www.welshdragonmodels.co.uk/tai ... 1744-p.asp
It would be worth phoning him to see whether he'll supply the parts you need. There's a good chance he will.
Tanks for the memory?