Tamiya Pershing parts

Is there anything in particular that you want? Ask for it here and see if anybody has what you're looking for.
Forum rules
RULES LAST UPDATED 25/03/2019
Please make sure you are up to date with the Wanted section rules and guidelines before creating a new post. You can find them here: viewtopic.php?t=27359
Post Reply
User avatar
jimbo_wa
Corporal
Posts: 380
Joined: Fri Dec 21, 2018 3:55 pm
Location: Cambridge, UK

Tamiya Pershing parts

Post by jimbo_wa »

Looking for the below parts after an over-zealous child (not mine) took control and :problem:

Idler centre cap:
AParts.JPG
Headlight surround (LHS, looking from front)
GParts.JPG
GParts.JPG (80.94 KiB) Viewed 660 times
2x rubber 'tyres'
MR1Parts.JPG
MR1Parts.JPG (32.7 KiB) Viewed 660 times
:thumbup:
Ludwig von wigbearer
Staff Sergeant
Posts: 769
Joined: Sat Oct 29, 2016 8:57 pm
Location: Retford Nottinghamshire

Re: Tamiya Pershing parts

Post by Ludwig von wigbearer »

Hi jimbo, if its any consolation i am also missing a idler cap off mine :haha:
I think the sprue is available from axels for about £15 plus p&p, i took an existing cap off on mine and made a
mould with blu tac, filled it with car body filler, its a passable replacement but not perfect.
Dave (forgebear) has walker bulldog wheel caps in that could possibly work with modification.

regards john :wave:
User avatar
jimbo_wa
Corporal
Posts: 380
Joined: Fri Dec 21, 2018 3:55 pm
Location: Cambridge, UK

Re: Tamiya Pershing parts

Post by jimbo_wa »

Cheers John, I've tried the HL Bulldog part - you're right that it is a bit of a kludge...

Sent from my Pixel 2 using Tapatalk
gorehound
Private
Posts: 78
Joined: Mon Oct 06, 2008 12:44 am

Re: Tamiya Pershing parts

Post by gorehound »

Hi Jimbo

I can give you the centre caps as I have a spare sprue lying in my box of parts. I have one headlight guard but not sure if it is the correct one - I have the right side front one here?

Not got tyres though sorry.
User avatar
jimbo_wa
Corporal
Posts: 380
Joined: Fri Dec 21, 2018 3:55 pm
Location: Cambridge, UK

Re: Tamiya Pershing parts

Post by jimbo_wa »

Big thanks to Steve (gorehound) for the centre caps and light guard - top chap all round!Image

Image

Sent from my Pixel 2 using Tapatalk
Post Reply

Return to “Wanted”