Would consider painted parts
Is there any way to get these parts from Bandai, if I knew the sprue details?
- Side 1.jpeg (6.92 KiB) Viewed 514 times
- side 2.jpeg (6.81 KiB) Viewed 514 times
Bandai 1/15 Hummel cannon mount
Forum rules
RULES LAST UPDATED 25/03/2019
Please make sure you are up to date with the Wanted section rules and guidelines before creating a new post. You can find them here: viewtopic.php?t=27359
RULES LAST UPDATED 25/03/2019
Please make sure you are up to date with the Wanted section rules and guidelines before creating a new post. You can find them here: viewtopic.php?t=27359
-
Vacformedhero
- Recruit
- Posts: 1
- Joined: Wed Aug 24, 2016 8:28 pm
Bandai 1/15 Hummel cannon mount
I am looking for the cannon mount sides from a Bandai 1/15 Hummel, I'm not sure if these are ever replaced.
Would consider painted parts
Is there any way to get these parts from Bandai, if I knew the sprue details?
Would consider painted parts
Is there any way to get these parts from Bandai, if I knew the sprue details?
-
c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: Bandai 1/15 Hummel cannon mount
If you had measurements could this be produced via 3-D printing? Saves buying a whole set of sprues or a full kit. 
Tanks alot....
