Timbered House Type A

Postby hotte8487 » Sun Jan 06, 2019 6:04 pm

Long time ago I’ve built a timbered house under construction for our battle field, role model was the house at the picture. Now I’ve picked up this topic again and built again a timbered house – this time in finished state.

Image

The technology will be the same; for the timber work were again 10 mm square bars used. First were the bars cut to length…

Image

…and from that were the single timbering parts built.

Image

Thereafter were these parts with the threshold to the single walls completed.

Image

Image

The single wall parts were glued together…

Image

…and finished was the ground floor.

Image

Wooden nails and a crossbar are helpful for a good stability.

Image

After sanding the wooden nails was the timbering for the ground floor finished.

Image

Image

Continued soon…
User avatar
hotte8487
Sergeant
 
Posts: 709
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Postby Son of a gun-ner » Sun Jan 06, 2019 11:50 pm

Well, I'm waiting. . . .

Gosh, the suspense is killing me 8O
User avatar
Son of a gun-ner
TOTM Admin
 
Posts: 2042
Joined: Sun May 07, 2017 8:49 pm
Location: Surrey UK

Postby c.rainford73 » Mon Jan 07, 2019 2:26 am

Another stunning build :clap:
User avatar
c.rainford73
Major
 
Posts: 5327
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Postby hotte8487 » Thu Jan 10, 2019 8:44 pm

Son of a gun-ner wrote:Well, I'm waiting. . . .

Gosh, the suspense is killing me 8O


The wait is finally over...
User avatar
hotte8487
Sergeant
 
Posts: 709
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Postby hotte8487 » Thu Jan 10, 2019 9:16 pm

Next step is the roof construction. The roof rafters have the shape of a isosceles triangle; 5 of them were built.

Image

Two of them were used as gable end; as first were the measures transfered.

Image

Then receives the gables their timber work…

Image

…and here is the first gable already finished.

Image

Both gables were thereafter with clamps at the side walls temporary mounted,…

Image

…the ridge board added and…

Image

…glued.

Image

Also the gables and the ground floor were at the outsides with wooden nails mounted…

Image

…and the complete roof mounted. In The middle hold clamps the rafter in position.

Image

That’s all for today…
User avatar
hotte8487
Sergeant
 
Posts: 709
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Postby maxmekker » Thu Jan 10, 2019 9:33 pm

Respect x 10 :thumbup:
User avatar
maxmekker
Warrant Officer 2nd Class
 
Posts: 1409
Joined: Tue Apr 27, 2010 8:47 am
Location: Norway

Postby yan33 » Thu Jan 10, 2019 9:43 pm

i love it :thumbup: :thumbup: :thumbup: :thumbup:

yan33
Recruit
 
Posts: 41
Joined: Wed Feb 19, 2014 9:46 pm

Postby Son of a gun-ner » Fri Jan 11, 2019 1:13 am

Fantastic :clap: :clap:
User avatar
Son of a gun-ner
TOTM Admin
 
Posts: 2042
Joined: Sun May 07, 2017 8:49 pm
Location: Surrey UK

Postby Lo_Thar » Sat Jan 12, 2019 1:11 pm

LoL its fantastic!

Lo_Thar
Private
 
Posts: 77
Joined: Fri Aug 03, 2018 12:56 pm
Location: Poland

Postby hotte8487 » Thu Jan 17, 2019 7:19 pm

Many thanks men. :clap:
User avatar
hotte8487
Sergeant
 
Posts: 709
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Postby hotte8487 » Thu Jan 17, 2019 7:29 pm

Continued at the timber work; for the masonry has been used 1 cm thick styrodur plates,…

Image

The corresponding wall parts has been detached with a cutter knife.

Image

Image

Each part has been pushed in position.

Image

Image

Image

Image

At last has been all parts marked and find a new place in a box. A whole box full of wall parts…

Image

Next time it goes on.
User avatar
hotte8487
Sergeant
 
Posts: 709
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Postby Son of a gun-ner » Thu Jan 17, 2019 7:33 pm

:haha: Only you could have built it this way :clap: :clap:

I would have glued wooden or cardboard strips to a sheet of ply.
User avatar
Son of a gun-ner
TOTM Admin
 
Posts: 2042
Joined: Sun May 07, 2017 8:49 pm
Location: Surrey UK

Postby hotte8487 » Sun Jan 20, 2019 8:42 am

After now all was prepared to build the walls is some point still missing – the preservation of the timber work with a simultaneously colouring of the outsides of timber work. For that was the varnish with oil paint coloured and thereafter started.

Image

Coloured have been only the outsides; inside was the varnish unchanged used.

Image

Image

Thereafter have been the first wall parts coloured with a white acrylic paint – often to see at timbered houses. Probably was a lime paint used.

Image

Meanwhile painting I’ve tried to receive a bit aged walls – afterwards less work. Some spallings in the plaster has been also displayed.

Image

The wall parts have been glued then into the timber; used was Latex Binder. This is after drying colourless and remains permanently flexible.

Image

Here is now the spalled wall part glued; view from a greater distance…

Image

…and this view a bit closer.

Image

Until the next time…
User avatar
hotte8487
Sergeant
 
Posts: 709
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Postby hotte8487 » Wed Jan 23, 2019 7:22 pm

It goes on; the bricklayer and the painter have their hands full.

Image

The first gable wall is finished.

Image

Mixed up it goes on;…

Image

…at the front side…

Image

…and also at the rear side.

Image

Image

Slowly is there an end in sight…

Image

Image

A last timber work is remaining.

Image

So looks the timbered house at the moment; from front,…

Image

…from left side,…

Image

…from rear…

Image

…and from the right side.

Image

For today that’s again all.
User avatar
hotte8487
Sergeant
 
Posts: 709
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Postby hotte8487 » Sun Feb 03, 2019 8:51 pm

My house will receive some functions; on the one hand of course light, this is especially for our yearly meeting at sunset and for the other hand a smoker, who will let both chimneys smoke. At the next step I’ve glued aluminium foil on the inside of the walls. This should prevent, that the light shines through some gaps.

Image

Glued was the foil again with Latex Binder.

Image

Image

Thereafter has been built a helping construction for battery, smoker unit, ventilation case and both chimneys.

Image

Both chimneys have been made from styropor rests and should look like masonry with a little concrete head.

Image

Both parts received scratches for the masonry; at the same time receive the little chimney one and the bigger chimney two smoke outlets.

Image

Then has the masonry been finished.

Image

My helping construction to receive my function unit was built from stripes and plywood.

Image

But before the windows are in row,…

Image

…this in the next report.
User avatar
hotte8487
Sergeant
 
Posts: 709
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Postby hotte8487 » Fri Apr 05, 2019 9:36 pm

Continuing with the construction of the windows. For that I’ve been used stripes 10 x 3 mm, a groove was milled, and all parts have been cut to length and mitred.

Image

After sanding I’ve been started to mount the single windows; at first only two thighs.

Image

The inner part is milled from polystyrene.

Image

These parts have been plugged into the groove and the frame have been completed with both lack parts. The first window is finished.

Image

Altogether have been 10 windows needed. Thereafter has been the roof box with a board with 3 mm thickness closed.

Image

It follows fit in of the windows in the corresponding openings; the first window sits in the timber work.

Image

Piece for piece has been completed,…

Image

Image

…until I’ve finished with this work. In conclusion for today still one view.

Image

Until the next time.
User avatar
hotte8487
Sergeant
 
Posts: 709
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Postby hotte8487 » Thu Apr 25, 2019 7:18 pm

Both chimneys were built from styropor-pieces. The drafts are made from aluminium square tube. The head of the chimney was made with tile glue; both chimneys are here already primed.

Image

Here both chimneys in their later positions…

Image

Thereafter I’ve painted both parts with a brick-red colour.

Image

Followed by the joints; painted in dark grey.

Image

The windows have been also primed…

Image

…and thereafter with a dark white brushed.

Image

Image

That’s all for today.
User avatar
hotte8487
Sergeant
 
Posts: 709
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Postby Son of a gun-ner » Thu Apr 25, 2019 7:23 pm

Excellent :clap: :clap:
User avatar
Son of a gun-ner
TOTM Admin
 
Posts: 2042
Joined: Sun May 07, 2017 8:49 pm
Location: Surrey UK

Postby hotte8487 » Fri Apr 26, 2019 7:47 pm

Son of a gun-ner wrote:Excellent :clap: :clap:


Thank you Sir! 8)
User avatar
hotte8487
Sergeant
 
Posts: 709
Joined: Thu Aug 04, 2011 6:28 am
Location: Berlin, Germany

Postby Rad_Schuhart » Fri Apr 26, 2019 7:56 pm

Dont stop, More photos!
User avatar
Rad_Schuhart
Warrant Officer 2nd Class
 
Posts: 1229
Joined: Tue Jan 19, 2016 10:22 am
Location: Spanish living in Graz, Austria. Heart in UK.

Next

Return to Battlefield Buildings

Who is online

Users browsing this forum: No registered users and 1 guest