3D printed Jagdpanzer 38t Hetzer 1/6 RTR
Posted: Mon Apr 05, 2021 4:53 pm
Hi,
have this 1/6 Hetzer for sale.
Reason for sale: i dont have space to store 1/6 models now.
It was builded to test STL files for printing.
Fully assembled.Used only for the test drives.
Vehicle is fully 3D printed.
IMPORTANT NOTE: There is no PLA plastic used on my models.
All my printed models can withstand temperatures to at least 80°C.
More than 11 kg of material was used to print this.
Hundreds of hours of the printing time.
Lenght without a gun : 800mm
Height to the roof:320mm
Width: 450mm
Weight: 13kg
-all hatches openable
-servo controlled vertical and horizontal movement of the canon
-servo controlled recoil
-movable gunners sight coupled with gun
-realistic gun's rifling
-realistic periscopes
-360° rotating machinegun mount
-LED light for the front light (2x5mm LED)
-LED light for the tail light (3x3mm LED)
-tracks tensioners
-working suspensions
-detachable spare track links
-rubber rims of roadwheels
-detailed resin parts
-mg34 machinegun
You can check the Assembly Guide here.You can see whole construction there:
dropbox.com/s/knmd32cegwb78ql/Hetzer16-Assembly_EN.pdf?dl=0
Buildthread:
rctankwarfare.co.uk/forums/viewtopic.php?f=150&t=30831
Preparing some videos, i will show you RC functions very soon.
If you have an interest, i can make some additional videos and photos of the interrior and mechanical parts.
Its not my target to make models as cheapest as possible.
There is 51 bearings inside, for the example.
As every Warprints model, its designed to be durable, full of functions and details.
Its my first 1/6 scale model.Its a little bit hard for me to set price tag.
Looking for about 2500€ (+ shipping) for this one.Elmod pro will be included (no transmitter).
have this 1/6 Hetzer for sale.
Reason for sale: i dont have space to store 1/6 models now.
It was builded to test STL files for printing.
Fully assembled.Used only for the test drives.
Vehicle is fully 3D printed.
IMPORTANT NOTE: There is no PLA plastic used on my models.
All my printed models can withstand temperatures to at least 80°C.
More than 11 kg of material was used to print this.
Hundreds of hours of the printing time.
Lenght without a gun : 800mm
Height to the roof:320mm
Width: 450mm
Weight: 13kg
-all hatches openable
-servo controlled vertical and horizontal movement of the canon
-servo controlled recoil
-movable gunners sight coupled with gun
-realistic gun's rifling
-realistic periscopes
-360° rotating machinegun mount
-LED light for the front light (2x5mm LED)
-LED light for the tail light (3x3mm LED)
-tracks tensioners
-working suspensions
-detachable spare track links
-rubber rims of roadwheels
-detailed resin parts
-mg34 machinegun
You can check the Assembly Guide here.You can see whole construction there:
dropbox.com/s/knmd32cegwb78ql/Hetzer16-Assembly_EN.pdf?dl=0
Buildthread:
rctankwarfare.co.uk/forums/viewtopic.php?f=150&t=30831
Preparing some videos, i will show you RC functions very soon.
If you have an interest, i can make some additional videos and photos of the interrior and mechanical parts.
Its not my target to make models as cheapest as possible.
There is 51 bearings inside, for the example.
As every Warprints model, its designed to be durable, full of functions and details.
Its my first 1/6 scale model.Its a little bit hard for me to set price tag.
Looking for about 2500€ (+ shipping) for this one.Elmod pro will be included (no transmitter).