Original Benedini Soundmodule TBS Mini V2

Please post here if there is anything that you want to sell.
Forum rules
RULES LAST UPDATED 13/03/2016
Please make sure you are up to date with this sections rules and guidelines before creating a new post. You can find them here: viewtopic.php?t=25306
Locked
User avatar
Kaczor
Warrant Officer 1st Class
Posts: 1775
Joined: Fri May 18, 2018 9:58 am
Location: Ciechanow, Poland
Contact:

Original Benedini Soundmodule TBS Mini V2

Post by Kaczor »

For sale: Original Benedini Soundmodule TBS Mini V2 (NOT Chinese copy) - used occasionally. Programming cable included.

Price: 65 EUR + 20 EUR Delivery (Europe) or 30 EUR (rest of the World).

Description from producer's page:
The TBS Mini V2 is the next stop to the very successful TBS Mini V1.

New features:
- 16x larger sound memory, enough for 28 Minuts of sound
- Powerful 3W digital amplifier on board
- 4OHm and 8 Ohm speakers can be used
- Volume controller on board
- New connector for 3rd party amplifiers -> See manual !

- Dimmension is 3mm wider
- Receiver supply must be in the range of 4-6V

Manual TBS Mini V2

Aditional features:

Fully customer programmable,
Large FREE OF CHARGE sound libraries of original recordings (f.e. Corsair, ME109, Spitfire, Cessna, dif. Trucks)
Soundquality 22KHz
16Mbit Soundmemory, enough for 93s of soundrecordings
Internal 1,2W amplifier at 8 Ohm speakers
External high power amplifiers available
Up to 6 electronic switching outputs
- activated by sound (f.e. Muzzle flashing with MG sound) or independant operation
- permanent, momentary or flashing mode adjustable
- direction flashing
Externel smoke generator for exhaust simulation (see below). Not recommended for aircrafts !
Twodigital inputs for triggering sounds by a external signal
(f.e. Screaming tires at touch down, triggered by a switch)
Twoservo signal outputs, f.e. for retractable landing gears
All connections done by plugs, no solderwork necessary
Receiver signals are used for speedinformation, this allows brushless or DC Motor usage
All connections horizontally -> full isolation and protection by shrinked plastic tube possible
Fully assembeled in SMD technology (no heavy, vibration sensitive components)
All wires included
Very little dimensions and weight
USB or RS232 programing interface by external adaptor
-Firmware update, your unit can be updated by your own with the latest software
Plays two sounds simultaneously (engine plus a special sound) from TBS Flash Ver. 1.0.1.0 on
Technical Datas:
Supplyrange: 4V – max. 6V (from receiver)
Internal amplifier: 3W at 4 Ohm and 6V supply
Switching outputs: Minus switching, max. 12V/0,5A each
Dimensions: only 55 x 28 x 10mm (3mm wider than the TBS Mini V1)
Weight: about 6g
Attachments
TBSMini_3.jpg
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1989
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Original Benedini Soundmodule TBS Mini V2

Post by Rad_Schuhart »

Bargain!
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
Ludwig von wigbearer
Staff Sergeant
Posts: 769
Joined: Sat Oct 29, 2016 8:57 pm
Location: Retford Nottinghamshire

Re: Original Benedini Soundmodule TBS Mini V2

Post by Ludwig von wigbearer »

Pm sent :thumbup:
User avatar
Kaczor
Warrant Officer 1st Class
Posts: 1775
Joined: Fri May 18, 2018 9:58 am
Location: Ciechanow, Poland
Contact:

Re: Original Benedini Soundmodule TBS Mini V2

Post by Kaczor »

Sold!
Locked

Return to “For Sale”