3D printed Hetzer 1/16 KIT
Forum rules
RULES LAST UPDATED 13/03/2016
Please make sure you are up to date with this sections rules and guidelines before creating a new post. You can find them here: viewtopic.php?t=25306
RULES LAST UPDATED 13/03/2016
Please make sure you are up to date with this sections rules and guidelines before creating a new post. You can find them here: viewtopic.php?t=25306
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: 3D printed Hetzer 1/16 KIT
Please put my name down for the STL’s, money available immediately
Cheers
Wayne
Sent from my iPhone using Tapatalk
Cheers
Wayne
Sent from my iPhone using Tapatalk
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: 3D printed Hetzer 1/16 KIT
Any news on the availability of the STL’s?
Cheers
Wayne
Sent from my iPhone using Tapatalk
Cheers
Wayne
Sent from my iPhone using Tapatalk
Re: 3D printed Hetzer 1/16 KIT
Hi,
sorry for the delay, but no.Website is not ready.
I am too busy, because i have a lot of orders for that Hetzer kits and i am still doing my fulltime job.
Its a little bit complicated now because of the time, but i am working on that.
sorry for the delay, but no.Website is not ready.
I am too busy, because i have a lot of orders for that Hetzer kits and i am still doing my fulltime job.
Its a little bit complicated now because of the time, but i am working on that.
facebook.com/warprints
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: 3D printed Hetzer 1/16 KIT
Thanks for the reply, please let me know when the stl’s are available & I will send you the payment immediately
Cheers
Wayne
Sent from my iPhone using Tapatalk
Cheers
Wayne
Sent from my iPhone using Tapatalk
Re: 3D printed Hetzer 1/16 KIT
hello 50koruny, is it possible to order the kit with metal tracks? when does it cost?
Re: 3D printed Hetzer 1/16 KIT
Hi.
Not yet.I have talked about that with Attila from Attracks but was busy.I can try again, and ask him again for cast some steel tracks.
I dont have idea about price of that tracks.
Not yet.I have talked about that with Attila from Attracks but was busy.I can try again, and ask him again for cast some steel tracks.
I dont have idea about price of that tracks.
facebook.com/warprints
Re: 3D printed Hetzer 1/16 KIT
did you not purchase them from DKLM for the first hetzer?
Re: 3D printed Hetzer 1/16 KIT
No.Again.This is not a set for Hetzer.DKLM tracks are LT-38 tracks.Hetzer tracks are wider.
I have my own 3D printed tracks on all my vehicles.
I have my own 3D printed tracks on all my vehicles.
facebook.com/warprints
Re: 3D printed Hetzer 1/16 KIT
Hi,
i have decided to release STL files for forum members.
Its not a official release - its for the forum members only.
PM me to get the files.
Price: 55€
Here is the Printing guide:
https://drive.google.com/open?id=1orbg- ... svGUdBGvZj
and Assembly guide:
https://drive.google.com/open?id=18LCJD ... Z1xlfTM2r5
Files are suitable for every 3D printer with 0,3mm nozzle and 200x200x200mm printing area.
Check that guides for more informations about printing and assembly.
i have decided to release STL files for forum members.
Its not a official release - its for the forum members only.
PM me to get the files.
Price: 55€
Here is the Printing guide:
https://drive.google.com/open?id=1orbg- ... svGUdBGvZj
and Assembly guide:
https://drive.google.com/open?id=18LCJD ... Z1xlfTM2r5
Files are suitable for every 3D printer with 0,3mm nozzle and 200x200x200mm printing area.
Check that guides for more informations about printing and assembly.
facebook.com/warprints
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: 3D printed Hetzer 1/16 KIT
I can thoroughly recommend these files, my first few parts are coming off the printer tonight & they look awesome
Cheers
Wayne
Sent from my iPhone using Tapatalk
Cheers
Wayne
Sent from my iPhone using Tapatalk