Bruder D5 dozer

Please post here if there is anything that you want to sell.
Forum rules
RULES LAST UPDATED 13/03/2016
Please make sure you are up to date with this sections rules and guidelines before creating a new post. You can find them here: viewtopic.php?t=25306
Locked
igotit
Lance Corporal
Posts: 136
Joined: Tue Dec 29, 2015 5:00 am

Bruder D5 dozer

Post by igotit »

i have a few options to sell
i take paypal as payment
may be intrested in trades for construction type rc/semi trucks....ect

option 1 diy kit $100 shipped in the usa
for the diy builder i sell just the printed parts kit.
kit includes 2 sets of printed drive sprockets.a break in set,after 20 hour or tracks skip install the longer tooth set.servo mounts for blade lift.blade lift lever and piviot,and tamiya gear box cover and belly pan.
you supply your own D5,gearbox,electronics tx/rx....ect.
all parts printed in durable petg.

option 2 prebuilt kit $250 shipped in the usa
all the above diy parts kit will be made and installed,along with the tamiya gearbox with upgraded motors,already assembled in a brand new bruder d5
you only supply the servo,tx/rx controller and batteries of your choice.room is very limited on battery selection.

option 3 rtr minus charger $550 shipped in the usa
looks stock with full interior,only visible part not stock is the white drive hubs
includes
-turnigy tgy-i6s tx/rx (new)
-sabertooth 2x12 esc (new)
-tamiya 70168 gearbox (new)
-pololu 11k rpm motors (new)
-diy kit (new)
-bruder d5 modded for rc (new)
-2s 18650 battery box (new)
-2 samsung 25r 18650 cells green wrapper(new)
-cheap standard servo 40 oz trq min (used)
-new screws,used servo links.

if you price all this youll be over $350 in parts alone.ive already done all the guess work and figuring out.if you buy rtr i personally run a full battery charge thru it,5-6 hours of testing on every d5......on a single charge.
i run mine hard in damp sand to really torture it.
i wont go beast mode on yours.

OPTION 5 $500 for the rtr in the video below,its got 20 hours on it,runs like a new one,but a few scuffs on it.has all the parts as listed in the above rtr.

in this video its the rtr version i described,non weighted down.
the sabertooth puts track control on 1 stick leaving the other stick for blade .and the tgy-i6s is 10 ch capable.free firmware upgrades online.
https://www.youtube.com/watch?v=F3WuQDa_Rd8&t=14s


ImageD5 rtr by Nick Pellegrin, on Flickr
ImageBruder d5 by Nick Pellegrin, on Flickr
ImageBruder d5 by Nick Pellegrin, on Flickr
Locked

Return to “For Sale”