Wechoe/tamiya/trumpeter jagdtiger project.

Please post here if there is anything that you want to sell.
Forum rules
RULES LAST UPDATED 13/03/2016
Please make sure you are up to date with this sections rules and guidelines before creating a new post. You can find them here: viewtopic.php?t=25306
Locked
User avatar
tomhugill
Captain
Posts: 4754
Joined: Thu Apr 15, 2010 11:21 am

Wechoe/tamiya/trumpeter jagdtiger project.

Post by tomhugill »

Another one of my projects for sale

Wechoe chassis, tamiya running gear inc gearboxes and tracks with a trumpeter jagdtiger kit.

Some work has been done, plan was to build her with the interior, lift off roof with the electeical gubbins hidden underneath. To this end the wechoe hulls been snipped to fit the trumpeter uppers sponsons. Some assemblies been done on the gun from the kit.

I believe pretty much everything is there to build the jagdtiger aside from the barrel to which one half is missing, plan was to ask mk modellbau to make an alloy one to the trumpeter size. Wheels from the kit are also missing I'm using the tamiya running gear. However I've not been through part by part.

Should be fairly spectacular when finished.

After £350. Can post at buyers Cost and risk.

ImageImageImageImageImageImageImageImage

ImageImageImageImage

Sent from my SM-G950F using Tapatalk
Met5
Corporal
Posts: 262
Joined: Fri Jan 13, 2017 5:08 am
Location: Rome, Italy

Re: Wechoe/tamiya/trumpeter jagdtiger project.

Post by Met5 »

you did a good job, I could take it back
User avatar
tomhugill
Captain
Posts: 4754
Joined: Thu Apr 15, 2010 11:21 am

Re: Wechoe/tamiya/trumpeter jagdtiger project.

Post by tomhugill »

Met5 wrote:you did a good job, I could take it back
I don't mind posting if you were interested
Met5
Corporal
Posts: 262
Joined: Fri Jan 13, 2017 5:08 am
Location: Rome, Italy

Re: Wechoe/tamiya/trumpeter jagdtiger project.

Post by Met5 »

do you already have a solution for the cannon barrel?
User avatar
tomhugill
Captain
Posts: 4754
Joined: Thu Apr 15, 2010 11:21 am

Re: Wechoe/tamiya/trumpeter jagdtiger project.

Post by tomhugill »

Met5 wrote:do you already have a solution for the cannon barrel?
Mk modellbau I'm sure could make a replacement to the correct spec.
Locked

Return to “For Sale”