Still seeking help with 9xPro and TK 60G2 programming

Discuss your radio gear here!
Post Reply
User avatar
BarryC
2nd Lieutenant
Posts: 2463
Joined: Sun Jan 03, 2016 11:43 am
Location: Savannah, GA. USA

Still seeking help with 9xPro and TK 60G2 programming

Post by BarryC »

With Rad's help I've now loaded my xmitter with erskyTx 9xrPro sw.

Now looking for someone versed in programming the radio for the Clark TK60G2 board.

HELP!

TIA,
Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Still seeking help with 9xPro and TK 60G2 programming

Post by Rad_Schuhart »

Programming the radio is not an issue. What is needed is the clark's manual.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Still seeking help with 9xPro and TK 60G2 programming

Post by Jofaur86 »

Hello :D
http://www.clark-model.com/eng/index_e.html
attached Clark website, in the left column Click on TK 60, I personally only have a TK24, but for my part? noted that it is necessary to respect the position of the sticks on the TX and according to the diagrams, red dots on black backgrounds on the manual, I personally used servos on the RX in order to repeat the correct commands,
I am not a programming pro, but had to look to find the right Clark and RX platinum connections and TX commands, this in my case? I don't know if it will help? good luck
User avatar
BarryC
2nd Lieutenant
Posts: 2463
Joined: Sun Jan 03, 2016 11:43 am
Location: Savannah, GA. USA

Re: Still seeking help with 9xPro and TK 60G2 programming

Post by BarryC »

Hi Guys,

I guess I'm just a modeler and not an RC operator.

With everything connected per the "Clark Manual" if that is what they call that on their site.

Here is what I have. When I turn both the xmitter and board (tank) on I can here a short burst of sound (static) come from the speaker. I have functioned every stick and switch and the only thing I hear is the turret rotation sound (left stick lateral movement) and elevation sound (left stick vertical movement). No other switch or stick causes any reaction.

Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
User avatar
BarryC
2nd Lieutenant
Posts: 2463
Joined: Sun Jan 03, 2016 11:43 am
Location: Savannah, GA. USA

Re: Still seeking help with 9xPro and TK 60G2 programming

Post by BarryC »

Well if the prophet will not come to the mountain then the mountain must go to the prophet!

As the Clark TK60G2 boards are factory set based on the configuration of the FS-i16S and associated Receivers I just purchased one and now I have a functional tank. :clap:

I will continue to use my Turnigy X9R as I have two but not for the Abrams with the GBS. :thumbup:

Thanks for everyone's assistance!
Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
Post Reply

Return to “Radio Gear”