Help with programing Turnigy 9XR Pro

Discuss your radio gear here!
Post Reply
User avatar
BarryC
2nd Lieutenant
Posts: 2463
Joined: Sun Jan 03, 2016 11:43 am
Location: Savannah, GA. USA

Help with programing Turnigy 9XR Pro

Post by BarryC »

Title says it all.

Is there a simple set of instructions somewhere that covers assigning/re-assigning switch functions to specific board functions using the TK60G2?

The xmitter currently has the Tanker9XR software loaded and well as the ASP-06 and 07. I have managed to get main functions, sound, drive and a couple of others using the ASP-07 but not very well.

Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
User avatar
tomhugill
Captain
Posts: 4745
Joined: Thu Apr 15, 2010 11:21 am

Re: Help with programing Turnigy 9XR Pro

Post by tomhugill »

BarryC wrote:Title says it all.

Is there a simple set of instructions somewhere that covers assigning/re-assigning switch functions to specific board functions using the TK60G2?

The xmitter currently has the Tanker9XR software loaded and well as the ASP-06 and 07. I have managed to get main functions, sound, drive and a couple of others using the ASP-07 but not very well.

Barry
Hey Barry,

I can probably help here
User avatar
BarryC
2nd Lieutenant
Posts: 2463
Joined: Sun Jan 03, 2016 11:43 am
Location: Savannah, GA. USA

Re: Help with programing Turnigy 9XR Pro

Post by BarryC »

tomhugill wrote:
Hey Barry,

I can probably help here
Tom, that would be awesome!

I have/am considering flashing new sw to the xmitter because the Tanker sw is no longer supported as I understand it.

I would still like to know how to assign specific functions to specific switches/controls. Hopefully it a manner that a neophyte like myself can understand.

Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Help with programing Turnigy 9XR Pro

Post by Rad_Schuhart »

Yes, you should start flashing new software to it, and nobody should use tanker9x anymore. Latest version is from two days ago, and it updates like twice in a month.
https://openrcforums.com/forum/viewtopic.php?t=4676
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
User avatar
BarryC
2nd Lieutenant
Posts: 2463
Joined: Sun Jan 03, 2016 11:43 am
Location: Savannah, GA. USA

Re: Help with programing Turnigy 9XR Pro

Post by BarryC »

Hi Rad,

Is this the procedure I need to follow?

https://www.youtube.com/watch?v=BOEvvDpWEb8

Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Help with programing Turnigy 9XR Pro

Post by Rad_Schuhart »

BarryC wrote:Hi Rad,

Is this the procedure I need to follow?

https://www.youtube.com/watch?v=BOEvvDpWEb8

Barry
Hi, you can follow that video, or you can flash it directly with the radio. You can copy the software file either in the SD card or to connect the radio to the computer with the cable.

Id do the SD card and flash with the radio, is easier and faster and you cannot do it wrong, but both ways work.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
User avatar
BarryC
2nd Lieutenant
Posts: 2463
Joined: Sun Jan 03, 2016 11:43 am
Location: Savannah, GA. USA

Re: Help with programing Turnigy 9XR Pro

Post by BarryC »

Thanks Rad!

Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
Post Reply

Return to “Radio Gear”