Binding a RX18 version 3 with a Flysky I6X
Binding a RX18 version 3 with a Flysky I6X
I have been looking on YouTube and here trying to find out if it is possible to bind the two together so far i am not having any luck. I am curious has anyone had success sorry if i missed where someone has posted about it.
Re: Binding a RX18 version 3 with a Flysky I6X
Ok Thank you I was hoping i could but will go with the receiver and figure out how to hook up everything. Thank you again.
-
- Corporal
- Posts: 292
- Joined: Sun Jul 17, 2011 9:11 pm
- Location: The Chilly and Flat part of the Netherlands' North.
Re: Binding a RX18 version 3 with a Flysky I6X
Not possible.
Completely different coding.
What dòes work is the newest Taigen 2,4 ghz controller. The one with the separate soundcard.
If everything is allright, it should come with the cables to connect it to the Flysky receiver.
https://www.rctank.de/Taigen-V3-24-GHz- ... New-Sounds
Completely different coding.
What dòes work is the newest Taigen 2,4 ghz controller. The one with the separate soundcard.
If everything is allright, it should come with the cables to connect it to the Flysky receiver.
https://www.rctank.de/Taigen-V3-24-GHz- ... New-Sounds
Re: Binding a RX18 version 3 with a Flysky I6X
That is the one I do have sorry I was not more descriptive in what receiver i had. So now on how to hook up.
Re: Binding a RX18 version 3 with a Flysky I6X
Quick question? Beyond my effort, I have bound the receiver FS-IA6B with the controller, it moves the servo no problem I would like to use the new Taigen 2.4 ghz and nothing works even after hooking up the wires to the channels.
Anyone have any ideas. Or am i just doing it backwards.Or not gonna fly.
Anyone have any ideas. Or am i just doing it backwards.Or not gonna fly.
-
- Corporal
- Posts: 292
- Joined: Sun Jul 17, 2011 9:11 pm
- Location: The Chilly and Flat part of the Netherlands' North.
Re: Binding a RX18 version 3 with a Flysky I6X
I believe You'll have to set a jumper somewhere on the taigen rx18 to make it function with a normal RX(If I remember correctly.. I blew mine up ,so threw it away) ( I didn't understand your PM correctly. Sorry, my answer there is useless)
Taigen has the manual: https://www.taigentanks.com/taigen-user-manuals/
Aaand.. yes. A jumper has to be inserted to use an external receiver, otherwise the Taigen MFU just locks.
If thàt doesn't work ,then the Taigen MFu might just be broken.. not unheard of that brand-new Taigen or henglong electronics are broken ,sadly.
Taigen has the manual: https://www.taigentanks.com/taigen-user-manuals/
Aaand.. yes. A jumper has to be inserted to use an external receiver, otherwise the Taigen MFU just locks.
If thàt doesn't work ,then the Taigen MFu might just be broken.. not unheard of that brand-new Taigen or henglong electronics are broken ,sadly.
Re: Binding a RX18 version 3 with a Flysky I6X
Thank you Sir that is what I have been looking for.