Binding a RX18 version 3 with a Flysky I6X

Discuss your radio gear here!
Post Reply
scharky1
Recruit
Posts: 6
Joined: Thu Jul 05, 2018 6:57 pm

Binding a RX18 version 3 with a Flysky I6X

Post by scharky1 »

I have been looking on YouTube and here trying to find out if it is possible to bind the two together so far i am not having any luck. I am curious has anyone had success sorry if i missed where someone has posted about it.
scharky1
Recruit
Posts: 6
Joined: Thu Jul 05, 2018 6:57 pm

Re: Binding a RX18 version 3 with a Flysky I6X

Post by scharky1 »

Ok Thank you I was hoping i could but will go with the receiver and figure out how to hook up everything. Thank you again.
Jay-Em
Corporal
Posts: 292
Joined: Sun Jul 17, 2011 9:11 pm
Location: The Chilly and Flat part of the Netherlands' North.

Re: Binding a RX18 version 3 with a Flysky I6X

Post by Jay-Em »

Not possible.
Completely different coding.

What dòes work is the newest Taigen 2,4 ghz controller. The one with the separate soundcard.
If everything is allright, it should come with the cables to connect it to the Flysky receiver.

https://www.rctank.de/Taigen-V3-24-GHz- ... New-Sounds
scharky1
Recruit
Posts: 6
Joined: Thu Jul 05, 2018 6:57 pm

Re: Binding a RX18 version 3 with a Flysky I6X

Post by scharky1 »

That is the one I do have sorry I was not more descriptive in what receiver i had. So now on how to hook up.
scharky1
Recruit
Posts: 6
Joined: Thu Jul 05, 2018 6:57 pm

Re: Binding a RX18 version 3 with a Flysky I6X

Post by scharky1 »

Quick question? Beyond my effort, I have bound the receiver FS-IA6B with the controller, it moves the servo no problem I would like to use the new Taigen 2.4 ghz and nothing works even after hooking up the wires to the channels.
Anyone have any ideas. Or am i just doing it backwards.Or not gonna fly.
Jay-Em
Corporal
Posts: 292
Joined: Sun Jul 17, 2011 9:11 pm
Location: The Chilly and Flat part of the Netherlands' North.

Re: Binding a RX18 version 3 with a Flysky I6X

Post by Jay-Em »

I believe You'll have to set a jumper somewhere on the taigen rx18 to make it function with a normal RX(If I remember correctly.. I blew mine up ,so threw it away) ( I didn't understand your PM correctly. Sorry, my answer there is useless)

Taigen has the manual: https://www.taigentanks.com/taigen-user-manuals/

Aaand.. yes. A jumper has to be inserted to use an external receiver, otherwise the Taigen MFU just locks.

If thàt doesn't work ,then the Taigen MFu might just be broken.. not unheard of that brand-new Taigen or henglong electronics are broken ,sadly.
scharky1
Recruit
Posts: 6
Joined: Thu Jul 05, 2018 6:57 pm

Re: Binding a RX18 version 3 with a Flysky I6X

Post by scharky1 »

Thank you Sir that is what I have been looking for.
Post Reply

Return to “Radio Gear”