Fellas, can anyone help here...... Now, is there anyway I can control SMD’s powered by a 2x AA 1.5, battery pack using a spare channel on the RX, possible...........??
I would like to keep it independent of the ELMOD Fusion Pro board fitted to my Hooben T55.
To be honest I’m a complete novice with the “black art” of controlling working features from the TX. Im using a FLYSKY FS-i6s TX with 10 channel RX.
Controlling SMD’s from spare channel
Controlling SMD’s from spare channel
Take care..........Gary
- Rad_Schuhart
- Warrant Officer 1st Class
- Posts: 1989
- Joined: Tue Jan 19, 2016 9:22 am
- Location: Spanish living in Graz, Austria. Heart in UK.
- Contact:
Re: Controlling SMD’s from spare channel
Yup, and you even dont need to wire the leds to batteries, what you need to buy is an electronic switch (3 euros at hobbyking) some resistors and done.
The receiver will privide enough energy to the led.
The receiver will privide enough energy to the led.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
https://radindustries.wordpress.com/
Re: Controlling SMD’s from spare channel
Sorry for the delay in replying.......many thanks for the solution, I knew someone would be able to help.
Take care..........Gary
- Rad_Schuhart
- Warrant Officer 1st Class
- Posts: 1989
- Joined: Tue Jan 19, 2016 9:22 am
- Location: Spanish living in Graz, Austria. Heart in UK.
- Contact:
Re: Controlling SMD’s from spare channel
You are welcome.dabber wrote:Sorry for the delay in replying.......many thanks for the solution, I knew someone would be able to help.
Dont worry, you dont need anybody to help you. Plug this to the receiver https://hobbyking.com/en_us/dr-mad-thru ... tore=en_us
Solder the leds with the resistor to the other side.
Done
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
https://radindustries.wordpress.com/