Taigen v3 with flysky i6x problem

Discuss your radio gear here!
Post Reply
Rotter
Recruit
Posts: 1
Joined: Wed Dec 30, 2020 3:48 pm
Location: Ewing, Illinois, USA

Taigen v3 with flysky i6x problem

Post by Rotter »

I have several Taigen tanks from the kits, upgraded 2 with the newer v3 mb/radio. I have the flysky i6x radio and receiver to get more distance,I got them to bind but not to communicate with v3 mb. Plugged in a futuba servo which works fine into receiver though. The 2 prong jumper is installed in the mb, tank turn on set to channel 5(swa) and using mode 1. Radio set to AFHDS 2A with a ia10b receiver, aux switches set on, in PWM mode. Tried this with both tanks but will not turn the tank on. Am new to the setting up of radio's and receivers, only used them with old style servos back 30 years ago. I thought it might be the mb bad, but for 2 to do the same thing figured it was to nut behind the wheel, (me) Any help would be appreciated.
Post Reply

Return to “Radio Gear”