RC Tank Warfare community hobby forum

Sorry, but i am unable to find word "included" in this topic.
STL files are not released yet.
Its described in the bottom part of the first post:

50koruny wrote:...
Assembly guide is almost finished, basic STL files are ready.Just need to print this test vehicle.
Model will be ready like STL files for print or like a full kit (soon).
3D printer with at least 350x350x350mm buildplate is needed for print.

So - yes, files are ready, assembly guide is ready too, but i am not going to release that files before test.
It need to be fully tested - printing and assembly.
Have found 3 imperfections in the assembly and its only started.

Of course, i can contact you when ready.

Hi, have printed all big parts.
Its unnecessarily massive, maybe.

Nice work, but you really need to include something in the photos to give an idea of the size.
Here’s one I prepared earlier



Sent from my iPhone using Tapatalk

Will fit nicely in the boot of my car & I won't throw out my back trying to lift it in & out!

midlife306 wrote:Here’s one I prepared earlier

Give that man a Blue Peter Badge!

I swear, I always attach something to it.From now, forever.

Thank you for the picture, Wayne.
You can see a lot of changes inside of the hull in the new version.
Guards for the belts are removed.Actually, whole drivetrain is much simplifier now, there is a lot of space inside.
Dont need that belts anymore.

I’ve spotted lots of changes too, quality job


Sent from my iPhone using Tapatalk

Thank you.

Still need to make pictures of some new parts.
Have new periscopes with possibility of installing transparent sheet.
It will look more realistic with this.
Going to cut a lot of them with laser.Even rounded one for the gunners eye and one special for tail light.

Another (i think) great thing - complete machinegun assembly with shield is attached to the servo using magnets.
It can be easily removed for transport.

Saukopf is now fixed to the gun with two worm screws etc...
As i have said - its not just a simple rescale.Its deep rework and i am really enjoying possibilities of this scale.

Have one question, Wayne:
How much paint do you have spent for this one?

If I remember correctly, I think I used one can of white & 2 cans of red oxide. I use the white as a base coat so that when I’m wet sanding the red oxide I can see when I’m sanding too much off.
Cheers
Wayne



Sent from my iPhone using Tapatalk

But what about other colors?For camo?
For this first coat, i am using putty in spray.Not a primer.