3D printable Jagdpanzer 38t Hetzer in scale 1/6

Post all your larger scale RC Tanks, Half Tracks and Military Vehicles, build threads here. From 1/12 all the way up to 1/4! all here! Your Larger Scale figures are also welcome here.
Post Reply
User avatar
50koruny
Lance Corporal
Posts: 228
Joined: Mon Sep 04, 2017 6:49 pm
Location: Hungary
Contact:

3D printable Jagdpanzer 38t Hetzer in scale 1/6

Post by 50koruny »

Hi,
have decided to move on and trying out a "bigger" scale.
Redesigned my 1/16 Hetzer for 1/6 scale.
Most of the hardware is here
JGB37-550 - 12V and 260rpm.
It seems to be very suitable.High torque.
It will be attached directly to the drive sprocket.
No belts, chains etc...
IMG_20201124_124553791.jpg
Comparsion with the JGA25-370 for the 1/16 Hetzer.
IMG_20201124_124531812.jpg
IMG_20201124_124531812.jpg (88.43 KiB) Viewed 5149 times
MG995 servo for the gun.Machinegun will be equipped with the same 360° servo like 1/16 version (FS90R)
IMG_20201124_124827503.jpg
Have printed some parts too.Photos will come soon.
Whole vehicle will be printed and assembled in some 2 weeks, i hope.

Assembly guide is almost finished, basicc STL files are ready.Just need to print this test vehicle.
Model will be ready like STL files for print or like a full kit (soon).
3D printer with at least 350x350x350mm buildplate is needed for print.
facebook.com/warprints
User avatar
Steenv
Sergeant
Posts: 530
Joined: Thu Oct 02, 2008 6:44 pm
Location: Denmark
Contact:

Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6

Post by Steenv »

50koruny wrote:Hi,
have decided to move on and trying out a "bigger" scale.
Redesigned my 1/16 Hetzer for 1/6 scale.
Most of the hardware is here
JGB37-550 - 12V and 260rpm.
It seems to be very suitable.High torque.
It will be attached directly to the drive sprocket.
No belts, chains etc...
IMG_20201124_124553791.jpg
Comparsion with the JGA25-370 for the 1/16 Hetzer.
IMG_20201124_124531812.jpg
MG995 servo for the gun.Machinegun will be equipped with the same 360° servo like 1/16 version (FS90R)
IMG_20201124_124827503.jpg
Have printed some parts too.Photos will come soon.
Whole vehicle will be printed and assembled in some 2 weeks, i hope.

Assembly guide is almost finished, basicc STL files are ready.Just need to print this test vehicle.
Model will be ready like STL files for print or like a full kit (soon).
3D printer with at least 350x350x350mm buildplate is needed for print.
This is great news. Will there be a upgrade price for us that bougt the 1/16 version
Cheers
Steen


Sendt fra min SM-N975F med Tapatalk
Best regards
Steen

www.panzerteam.dk
User avatar
50koruny
Lance Corporal
Posts: 228
Joined: Mon Sep 04, 2017 6:49 pm
Location: Hungary
Contact:

Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6

Post by 50koruny »

Hi.
Of course.
Owners of the 1/16 version will get a upgrade pridce.
facebook.com/warprints
User avatar
Steenv
Sergeant
Posts: 530
Joined: Thu Oct 02, 2008 6:44 pm
Location: Denmark
Contact:

Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6

Post by Steenv »

50koruny wrote:Hi.
Of course.
Owners of the 1/16 version will get a upgrade pridce.
Fantastic Image

Sendt fra min SM-N975F med Tapatalk
Best regards
Steen

www.panzerteam.dk
User avatar
Hoover
Recruit
Posts: 14
Joined: Sat Jul 18, 2015 3:01 pm

Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6

Post by Hoover »

I just need a bigger printer now lol
:D
The detail in the instructions are spot on :clap:
User avatar
50koruny
Lance Corporal
Posts: 228
Joined: Mon Sep 04, 2017 6:49 pm
Location: Hungary
Contact:

Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6

Post by 50koruny »

Thank you.Trying to do my best.
Here is a working version of the Assembly guide for the 1/6 scale.
All changes between 1/16 and 1/6 can be seen there.



I dont know why its so big - 250mb, working on that.
Lots of bugs there (have a new version of the Assembly, but its not exported to PDF.working on this every day)

Some of the biggest news are parts 01-13A to 01-13F and new system of the machinegun installation (04-43 to 04-47).
facebook.com/warprints
User avatar
50koruny
Lance Corporal
Posts: 228
Joined: Mon Sep 04, 2017 6:49 pm
Location: Hungary
Contact:

Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6

Post by 50koruny »

Its going fast.Have some new pictures.

Comparsion with the 1/16
IMG_20201202_221649584.jpg
IMG_20201202_221649584.jpg (79.08 KiB) Viewed 4996 times
White color is PET(G), black is ABS.Excepting gun.Gun is printed from white ASA.
Have rifling inside.Need to do some good pictures of that.
IMG_20201202_221706905.jpg
IMG_20201202_221706905.jpg (85.79 KiB) Viewed 4996 times
IMG_20201202_221717055.jpg
IMG_20201202_221717055.jpg (75.28 KiB) Viewed 4996 times
IMG_20201202_221842221.jpg
IMG_20201202_221842221.jpg (83.81 KiB) Viewed 4996 times
IMG_20201202_221954622.jpg
IMG_20201202_221954622.jpg (95.74 KiB) Viewed 4996 times
IMG_20201202_222003934.jpg
IMG_20201202_222003934.jpg (95.74 KiB) Viewed 4996 times
IMG_20201202_222011932.jpg
IMG_20201202_222011932.jpg (88.91 KiB) Viewed 4996 times
IMG_20201202_222031217.jpg
Have prepared this 7kg of PET(G) for the big body parts.
Going to start printing them tomorrow.
IMG_20201202_212255364.jpg
IMG_20201202_212255364.jpg (85.52 KiB) Viewed 4996 times
Test run of the gun assembly coming soon.
Have picked screws for the whole vehicle in the local hardware store.
It was about 6€.
Almost all bearings are here, just waiting for the 624zz.
facebook.com/warprints
User avatar
Will01Capri
2nd Lieutenant
Posts: 2704
Joined: Tue Jul 18, 2017 5:34 pm
Location: South Scotland

Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6

Post by Will01Capri »

Looking good
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?

1/24 Leopard 2 Custom mod

2 many trucks to list!
User avatar
50koruny
Lance Corporal
Posts: 228
Joined: Mon Sep 04, 2017 6:49 pm
Location: Hungary
Contact:

Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6

Post by 50koruny »

Thank you.

Still playing with the files.Making optional/alternative files right now.
Have something new for this 1/6 version - there is one new alternative version for the upper hull - NO_HINGES.
This file is very usefull when you want to print big body parts without problems and little details.
There are no hinges on the upper cover, but they are printed separately.
You can print this big part much easier thanks to this.

And, as can be seen in the assembly guide - there is no type B gun.
Just one, with overengineered servo arms with bearings.
There are alternative files if you dont want to use servo arms with bearings, so you can use simple screw instead.

193 STL files are generated right now.It will be available for download before christmas.
facebook.com/warprints
User avatar
midlife306
Warrant Officer 1st Class
Posts: 2238
Joined: Sun Aug 27, 2017 10:34 am

Re: 3D printable Jagdpanzer 38t Hetzer in scale 1/6

Post by midlife306 »

I’m sure plenty of people will be all over this


Sent from my iPhone using Tapatalk
Post Reply

Return to “Larger Scale Military”