RC Tank Warfare community hobby forum

They should be fine, but I'd make sure to install some inline fuses, just in case. I'm running 30 amp Automotive fuses in my hetzer but that runs on a 6S lipo.

Thanks Gary, I thought the DMD would keep things simple, I found the motors at the weekend & just couldn’t resist
I’m just starting the hull out of 6mm plasticard (3 sheets of 2mm) and to say I’m high is an understatement lol
Cheers
Wayne


Sent from my iPhone using Tapatalk

Recently I was asked by George |Barnes to supply him with 1/6 scale Universal Carrier parts, and instead sold him all the running gear from my prototype. He has now constructed and completed a fabulous 1/6 scale Universal Carrier and had it running in the scout hut at the last meeting - Well done George!! I will post pictures after the next meeting

Meanwhile he expressed an interest in building a Loyd Carrier and having a 6 pounder gun to go with it, and I was so intrigued I decided to try and build one. Obviously printing a solid chassis was completely out of the question so I decided to build a skeleton frame. I downloaded the only blueprints I could find which are frankly pretty poor, but managed to scale them to the correct 1/6 size. The problem with the Loyd Carrier is that it has a completely open chassis with no cross structure to brace it, so I had to design a 3d printed frame that would provide some rigidity. From there it was just a case of designing the skeleton and printing it, and here it is:



Here's the dodgy blueprint



I am also thinking about a 1/6 6 pounder gun and here is the not very good blueprint and the 1/35 kit that I hope to scale from



Meanwhile I am hoping that someone somewhere has in their scrap box a pair of long axle drive shafts from a wrecked or discarded pair of gearboxes, something from a king tiger/jagdpanther,/panther, I need to create a drive system for the Loyd Carrier for George. I am happy to pay postage/costs whatever so please pm me if you can help.

Alwyn

It's great to see you busy in your creative mancave again, Alwyn. There has certainly been a void here that used to be filled with Alwyn projects!.

Thanks for that, much appreciated. I have really missed my mancave through all these months and it's great to be able to stretch my imagination again and have some fun creating weird things.

Alwyn

Excellent work Alwyn


Sent from my iPhone using Tapatalk

Some progress on the skeleton frame




Here's the best blueprint I could find


Some progress on the front axle/diff


Moving right along. I'll take it to the 5th december meet at the Scout Hut

Alwyn

Almost ready to deliver to George which I will probably do at the Scout Hut on the 5th Dec.




I even managed to find a couple of Lee Enfield rifles at 1/6 scale


Just the tyres to print and a couple of bevel gearboxes to design and print

Alwyn

The bevel gearbox design is done but will probably need fine tuning when the bevel gears finish their slow boat trip from China






At least I can show George what his gearboxes will look like tomorrow.

Alwyn

The slow boat from China actually speeded up and the bevel gears arrived, so I could finish the gearboxes



They actually turned out better than I expected so they will be delivered to George this week so he can progress the Loyd Carrier
Alwyn