Hi , as most of you saw I now have a cool, hand made in the Netherlands 1945 Hunting Panther.
It is amazing, however the electrics were not. They were old and dated. I started by removing the old firing unit (blanks) and all the wiring on the top portion. All that remains are the motor leads and the ground /power, the vantec speed controller has its wires also. So next I need the appropriate toggle switch, on/off on/on etc...
Any advice on that appreciated
Hopefully I will get some free time this weekend to continue.
New update and hoots soon
Sent from my iPhone using Tapatalk
1/10 Jagdpanther
- Markocaster
- Staff Sergeant
- Posts: 990
- Joined: Mon Mar 31, 2014 11:16 pm
- Location: Bay Area , California
1/10 Jagdpanther
HL /Mato tiger 1 early, Tamiya Tiger 1 early, Taigen tiger 1 mid
Taigen T34/85, HL SU-100
Jagdpanzer Lang
Taiga Jagdpanther
Heng Long Sherman DGS Firefly kit
Tamiya King Tiger (unbuilt)
Mato all metal Panzer III
1/10 Jagdpanther
Taigen T34/85, HL SU-100
Jagdpanzer Lang
Taiga Jagdpanther
Heng Long Sherman DGS Firefly kit
Tamiya King Tiger (unbuilt)
Mato all metal Panzer III
1/10 Jagdpanther
- Markocaster
- Staff Sergeant
- Posts: 990
- Joined: Mon Mar 31, 2014 11:16 pm
- Location: Bay Area , California
1/10 Jagdpanther
I actually got it to run today !
I hooked the battery to the main power of the speed controller, then attached my receiver powered by AA batteries and it runs. Forward backwards left and right.
I could use a little wiring advice on switch selection. I have 6 wires + & - for main power to speed controller and then a + & - for each of the motors. So I assume a 6 pole toggle but whitch configuration and how do I wire it. Cheers
The 6 wires I need a toggle for
Sent from my iPhone using Tapatalk
I hooked the battery to the main power of the speed controller, then attached my receiver powered by AA batteries and it runs. Forward backwards left and right.
I could use a little wiring advice on switch selection. I have 6 wires + & - for main power to speed controller and then a + & - for each of the motors. So I assume a 6 pole toggle but whitch configuration and how do I wire it. Cheers
The 6 wires I need a toggle for
Sent from my iPhone using Tapatalk
HL /Mato tiger 1 early, Tamiya Tiger 1 early, Taigen tiger 1 mid
Taigen T34/85, HL SU-100
Jagdpanzer Lang
Taiga Jagdpanther
Heng Long Sherman DGS Firefly kit
Tamiya King Tiger (unbuilt)
Mato all metal Panzer III
1/10 Jagdpanther
Taigen T34/85, HL SU-100
Jagdpanzer Lang
Taiga Jagdpanther
Heng Long Sherman DGS Firefly kit
Tamiya King Tiger (unbuilt)
Mato all metal Panzer III
1/10 Jagdpanther