gears and hedghog

[forgebear]

hi guys new stock parts just landed

SL378368.jpg (68.71 KiB) Viewed 2264 times

SL378370.jpg (84.77 KiB) Viewed 2264 times

SL378372.jpg (96.09 KiB) Viewed 2264 times

https://www.forgebeartanks.com/store/c32/Gearboxes.html

thanks guys

[Zed750Jay]

Hmmm, time for the wife to buy me some Xmas prezzy’s


Sent from my iPhone using Tapatalk Pro

[yan33]

is it possible to have the new gearboxes for a t90 ??

[forgebear]

if taigen makes them we would have it but only heng long is the maker of this tank so gears are only made in steel you may need to make a base up to fit taigen gears in to it
dave

[yan33]

thanks a lot for your answer

[tankme]

Yan33, for the T-90 you need a mid/low set of gearboxes to be able to fit them under the rear deck. The shaft length is 59mm (sometimes stated as 58mm on some gearboxes). Being that the T-90 hull is so wide, getting 390 motors in there are no issue at all either. I think the ones that Dave posted with the 76:1 gear ratio would be too slow for the T-90 anyway. Are you just looking to replace nylon or the pot metal gearboxes you have?

[yan33]

hello thanks for you help
i want just a gearbox to reduce the noise and the t90 go more faster than the origin

[Met5]

hello,
are the toothed wheels made of shear or machine tool? Because in the end that's what makes the difference

Regards

Fabio

[forgebear]

hi the gears are one piece steel gears
dave

[jhamm]

Dave,
steel gears are not just steel gears...
There is a big difference in whether these are made of cast iron, sintered steel or machined steel.
The machined steel one the strongest.