M24 Pershing starts the stops

Fixes and mods for the HL Pershing (Snow Leopard)
Post Reply
Bigmother62&
Recruit
Posts: 3
Joined: Fri Jan 15, 2021 2:38 pm

M24 Pershing starts the stops

Post by Bigmother62& »

I figured starting out as a new member in a new hobby. I started with just a bare hull and put it all together except the wiring schematic. I have a Pershing that has a 12 pin connector mounted on a board in the inside the top hull foreword along with 3-2 pin female receptacles and 1-3 pin receptacle. No manual or anything that would help in what wire goes where. The tank a 1:16 Pershing and I Carnot find anything that would help. The controller is a HL TK-6.1S and it has a receptacle that takes only 8 pin connector. Any idea where I might find said diagram or schematic.

Thanks in advance,
Bigmother62&
Last edited by Bigmother62& on Sun Jan 31, 2021 4:16 pm, edited 1 time in total.
User avatar
abramsky
Lance Corporal
Posts: 236
Joined: Thu Dec 03, 2020 12:55 am
Location: Poland

Re: M24 Pershing starts the stops

Post by abramsky »

Hi
First of all, the 8-pin socket plate in the upper hull will not be needed anymore. Of course, if you can, you can build a new one for TK 6.1s. I recommend something like this if you have some soldiering skills:
viewtopic.php?f=79&t=30884

Secondly. Most mechanism and LED's requires 2 wires ( plus and minus ) and an appropriate plug. The description of which socket is for what you can found on the back of the metal housing of the TK 6.1s. And the wiring diagram for 6.0/6.1 (6.1s has the same wiring scheme as 6.1) in Google.

http://www.google.com/search?q=heng+lon ... 20&bih=525

eg. here:
http://rctank.pl/forum/viewtopic.php?f=76&t=2471
Post Reply

Return to “HL Pershing (Snow Leopard)”