I am wondering if anyone knows were the crystals are for this tank. I have found them in the remote but not on the tank. Maybe part of the circuit board with the frequency switch? but theirs nothing that looks like a crystal.
Thanks c
Help with m41a3 tank
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
- forgebear
- Warrant Officer 1st Class
- Posts: 1807
- Joined: Fri Nov 21, 2008 11:15 pm
- Location: bedford
- Contact:
Re: Help with m41a3 tank
try in the base where the battery goes
Re: Help with m41a3 tank
nothing in battery case but the battery plug
- Model Builder 4
- 2nd Lieutenant
- Posts: 2329
- Joined: Sun Jul 26, 2015 3:46 pm
- Location: South Wales valleys
- Contact:
Re: Help with m41a3 tank
Hi,
Try taking the 4 screws out from the circuit board and look underneath it, I've had them there before
Cheers, Lee.
Try taking the 4 screws out from the circuit board and look underneath it, I've had them there before
Cheers, Lee.
Me ? Addicted ? Never !!
- forgebear
- Warrant Officer 1st Class
- Posts: 1807
- Joined: Fri Nov 21, 2008 11:15 pm
- Location: bedford
- Contact:
Re: Help with m41a3 tank
when you take off the battery cover you will see the part i have in red the Crystal should be there if there is no crystal but just 2 small pin holes then you will need to get a Crystal set like tx01 and rx01 any numbers will do if they are the same the tx will fit the transmitter and the rx in the tank