Turret ring turning module not work

Talk about all other types of electronics here, such as batteries!

Postby leopardgreece » Sun Jan 05, 2020 8:19 pm

Hallo to everyone and Happy New Year .!!!!!I have a problem...!!!!!! I connected the turret ring and the metal turning gear module as photo.In the beginning for a while works but after some seconds stops. I checked with polimeter and WITHOUT moving the stick on the radio control left or right, ...it continiously.... shows -10 Volt (continiously) both sides. What i must do ...?????????( The little motor works its ok) Kind Regards.ImageImageImage

Στάλθηκε από το SM-P605 μου χρησιμοποιώντας Tapatalk
User avatar
leopardgreece
Corporal
 
Posts: 358
Joined: Tue Oct 27, 2015 2:48 pm

Postby jarndice » Sun Jan 05, 2020 8:44 pm

I use the DKLM Turret rotation motors in most of my Panzers 4s, I did notice that the soldered wires coming out of the motor body were prone to failure and would short until I did a proper job of soldering the wires in place.
User avatar
jarndice
Major
 
Posts: 6107
Joined: Mon Sep 03, 2012 11:27 am
Location: the mountains of hertfordshire

Postby leopardgreece » Sun Jan 05, 2020 9:20 pm

But the motor works. I give it some current and its ok works

Στάλθηκε από το SM-P605 μου χρησιμοποιώντας Tapatalk
User avatar
leopardgreece
Corporal
 
Posts: 358
Joined: Tue Oct 27, 2015 2:48 pm


Return to Other electronics

Who is online

Users browsing this forum: No registered users and 2 guests