Help with m41a3 tank

If you have a tank query and you can't find the answer anywhere else, post here. (TIP - Check for answers in FAQ, use the 'search' facility or even check this board before posting here).
Forum rules
If your question is electronics related please post it in one of the relevant boards here: viewforum.php?f=31
Post Reply
boodaboo
Recruit
Posts: 2
Joined: Wed Jan 10, 2018 7:27 pm

Help with m41a3 tank

Post by boodaboo »

I am wondering if anyone knows were the crystals are for this tank. I have found them in the remote but not on the tank. Maybe part of the circuit board with the frequency switch? but theirs nothing that looks like a crystal.

Thanks c
User avatar
forgebear
Warrant Officer 1st Class
Posts: 1806
Joined: Fri Nov 21, 2008 11:15 pm
Location: bedford
Contact:

Re: Help with m41a3 tank

Post by forgebear »

try in the base where the battery goes
boodaboo
Recruit
Posts: 2
Joined: Wed Jan 10, 2018 7:27 pm

Re: Help with m41a3 tank

Post by boodaboo »

nothing in battery case but the battery plug
User avatar
Model Builder 4
2nd Lieutenant
Posts: 2329
Joined: Sun Jul 26, 2015 3:46 pm
Location: South Wales valleys
Contact:

Re: Help with m41a3 tank

Post by Model Builder 4 »

Hi,

Try taking the 4 screws out from the circuit board and look underneath it, I've had them there before :thumbup:

Cheers, Lee.
Me ? Addicted ? Never !! :crazy:
User avatar
forgebear
Warrant Officer 1st Class
Posts: 1806
Joined: Fri Nov 21, 2008 11:15 pm
Location: bedford
Contact:

Re: Help with m41a3 tank

Post by forgebear »

walker bulldog base (2)1.jpg
when you take off the battery cover you will see the part i have in red the Crystal should be there if there is no crystal but just 2 small pin holes then you will need to get a Crystal set like tx01 and rx01 any numbers will do if they are the same the tx will fit the transmitter and the rx in the tank
Post Reply

Return to “General Questions”